Rahul Sharma (Editor)

S5P4418

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit

S5P4418 is a system-on-a-chip (SoC) based on the 32-bit ARMv7-A architecture for tablets and cell-phones.

Contents

Introduction

S5P4418 uses the ARM Cortex-A9 in a quad core configuration, the latter provides a 50% overall performance boost over the earlier Cortex-A8 core. The SoC memory controller supports a maximum memory bandwidth of 6.4GB/s for heavy traffic operations such as 1080p video encoding and decoding, 3D graphics display and high resolution image signal processing with a Full HD display. The application processor supports dynamic virtual address mapping, which helps software engineers to fully utilize the memory resources with ease. The S5P4418 features the Mali-400MP graphics processing unit which supports OpenGL ES 1.1 and 2.0. The native dual display, in particular, supports Full HD resolution of a main LCD display and 1080p 60 frame HDTV display throughout HDMI, simultaneously.

Specifications

  • 28 nm HKMG process.
  • Quad-core ARM Cortex-A9 at 1.4 GHz
  • ARM Mali-400MP GPU
  • Full-HD Multi Format Video Codec
  • Supports MLC/SLC NAND Flash with Hardwired ECC algorithm (4/8/12/16/24/40/60-bit)
  • Dual Display up to 2048x1280, TFT-LCD, LVDS, HDMI 1.4a, MIPI-DSI output
  • Supports various memory types: x32 LPDDR3 up to 667 MHz (TBD), Low Voltage DDR3 , DDR3 up to 800 MHz
  • 3 channel ITUR.BT 656 Parallel Video Interface and MIPI-CSI
  • Security functions (AES, DES/TDES, SHA-1, MD5 and PRNG) and Secure JTAG
  • ARTIK530 — ARTIK530 is Samsung IoT module optimized for IoT gateway or devices with modest video and processing requirements.
  • MINI4418 — MINI4418 module is the Computer-on-Module that Boardcon designed for embedded solutions.
  • EM4418 — A single board computer features Samsung S5P4418 processor with 1GB RAM and 4GB eMMC Flash.
  • References

    S5P4418 Wikipedia