Suvarna Garge (Editor)

Rule of mixtures

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Rule of mixtures

In materials science, a general rule of mixtures is a weighted mean used to predict various properties of a composite material made up of continuous and unidirectional fibers. It provides a theoretical upper- and lower-bound on properties such as the elastic modulus, mass density, ultimate tensile strength, thermal conductivity, and electrical conductivity. In general there are two models, one for axial loading (Voigt model), and one for transverse loading (Reuss model).

Contents

In general, for some material property E (often the elastic modulus), the rule of mixtures states that the overall property in the direction parallel to the fibers may be as high as

E c = f E f + ( 1 − f ) E m

where

  • f = V f V f + V m is the volume fraction of the fibers
  • E f is the material property of the fibers
  • E m is the material property of the matrix

    • In the case of the elastic modulus, this is known as the upper-bound modulus, and corresponds to loading parallel to the fibers. The inverse rule of mixtures states that in the direction perpendicular to the fibers, the elastic modulus of a composite can be as low as

    E c = ( f E f + 1 − f E m ) − 1 .

    If the property under study is the elastic modulus, this quantity is called the lower-bound modulus, and corresponds to a transverse loading.

    Upper-bound modulus

    Consider a composite material under uniaxial tension σ ∞ . If the material is to stay intact, the strain of the fibers, ϵ f must equal the strain of the matrix, ϵ m . Hooke's law for uniaxial tension hence gives

    where σ f , E f , σ m , E m are the stress and elastic modulus of the fibers and the matrix, respectively. Noting stress to be a force per unit area, a force balance gives that

    where f is the volume fraction of the fibers in the composite (and 1 − f is the volume fraction of the matrix).

    If it is assumed that the composite material behaves as a linear-elastic material, i.e., abiding Hooke's law σ ∞ = E c ϵ c for some elastic modulus of the composite E c and some strain of the composite ϵ c , then equations 1 and 2 can be combined to give

    E c ϵ c = f E f ϵ f + ( 1 − f ) E m ϵ m .

    Finally, since ϵ c = ϵ f = ϵ m , the overall elastic modulus of the composite can be expressed as

    E c = f E f + ( 1 − f ) E m .

    Lower-bound modulus

    Now let the composite material be loaded perpendicular to the fibers, assuming that σ ∞ = σ f = σ m . The overall strain in the composite is distributed between the materials such that

    ϵ c = f ϵ f + ( 1 − f ) ϵ m .

    The overall modulus in the material is then given by

    E c = σ ∞ ϵ c = σ f f ϵ f + ( 1 − f ) ϵ m = ( f E f + 1 − f E m ) − 1

    since σ f = E ϵ f , σ m = E ϵ m .

    Other properties

    Similar derivations give the rules of mixtures for

  • mass density
    • ( f ρ f + 1 − f ρ m ) − 1 ≤ ρ c ≤ f ρ f + ( 1 − f ) ρ m
  • ultimate tensile strength
    • ( f σ U T S , f + 1 − f σ U T S , m ) − 1 ≤ σ U T S , c ≤ f σ U T S , f + ( 1 − f ) σ U T S , m
  • thermal conductivity
    • ( f k f + 1 − f k m ) − 1 ≤ k c ≤ f k f + ( 1 − f ) k m
  • electrical conductivity
    • ( f σ f + 1 − f σ m ) − 1 ≤ σ c ≤ f σ f + ( 1 − f ) σ m

    References

    Rule of mixtures Wikipedia
    (Text) CC BY-SA


    Similar Topics