Length 5.5 m | ||
 | ||
1 solo flug spl ausbildung tragschrauber rotorvox c2a 4k 360 grad
The Rotorvox C2A is a two-seat, pusher configuration autogyro developed in Germany.
Contents
- 1 solo flug spl ausbildung tragschrauber rotorvox c2a 4k 360 grad
- Tragschrauber rotorvox c2a beim berlandflug 4k 360 grad
- Design and development
- Specifications
- References
Tragschrauber rotorvox c2a beim berlandflug 4k 360 grad
Design and development
Structurally, the C2A is largely carbon-fibre monocoque. The fuselage pod contains a protective cell for the side-by-side seating behind a large, forward hinged, three piece canopy. A faired pylon, mounted immediately behind the cell supports a two blade aluminium rotor and behind it a 73 kW (98 hp) Rotax 914 liquid-cooled flat-four engine drives a three blade propeller. The rotor is pre-rotated hydraulically.
Flat-sided tail booms are held away from the fuselage on short stubs and each mounts a straight-tapered fin and rudder, their tips linked by the tailplane. There are shallow, long ventral fins. The C2A has a short-legged, wide track tricycle undercarriage with its mainwheels near to the forward end of the booms and a nosewheel under the forward fuselage.
At least two prototypes were flown over five years of development before C2A deliveries began in October 2014.
Specifications
Data from Jane's All the World's Aircraft 2015/16 p.279
General characteristics
Performance
