Manufacturer Rolls-Royce Ltd | Body style 4-door saloon | |
 | ||
Production 1946–1958
1883 produced (incl. 639 LWB cars) Class Full-size luxury car (F) Layout Front-engine, rear-wheel-drive Related | ||
The Silver Wraith was the first post-war Rolls-Royce. It was made from 1946 to 1958 as only a chassis at Rolls-Royce's former Merlin engine plant, their Crewe factory, alongside the shorter Bentley Mark VI. The Bentley too was available as a chassis for coachbuilders but also for the first time could be bought with a Rolls-Royce built standard steel body.
Contents
It was announced by Rolls-Royce in April 1946 as the 25/30 hp replacement for the 1939 Wraith in what had been their 20 hp and 20/25 hp market sector, that is to say Rolls-Royce's smaller car. The size was chosen to be in keeping with the mood of post-war austerity. Even very limited production of the chassis of the larger car, their Phantom, was not resumed until 1950 and then, officially, only for Heads of State.
Improvements announced were: chromium-plated cylinder bores for the engine; a new more rigid chassis frame to go with new independent front suspension and a new synchromesh gearbox. Chassis lubrication was now centralised.
Engine
The straight six-cylinder postwar engine, which had been briefly made for the aborted by war Bentley Mark V, replaced conventional overhead valve gear with an F-head configuration of overhead inlet valves and side exhaust valves and reshaped combustion chambers. There were new main and big-end bearings and a more efficient drive to the timing gear. To this prewar mix Rolls-Royce added chromed bores. Initially, this engine retained the Mark V's capacity of 4257 cc. increased from 1951 to 4566 cc and in 1955, after the introduction of the (standard wheelbase) Silver Cloud, to 4887 cc for the remaining Silver Wraiths.
Chassis
The first cars had an entirely new 127 inch (3226 mm) wheelbase chassis which differed considerably from that of the pre-war Wraith and was much nearer rigid. It matched the new Bentley chassis but with an extra 7 inch section added to the centre. The new chassis had coil sprung independent front suspension, which required a very rigid chassis to function properly, and at the rear conventional semi-elliptic springs and live axle. The braking system was a hybrid hydro-mechanical system with hydraulic front brakes and mechanical rears using the mechanical servo similar to that of the pre-war cars.
The last short-wheelbase cars were delivered in November 1953. The long, 133 inch (3378 mm), wheelbase chassis was announced in 1951 and the first delivered in January 1952. 639 were made by the time of the last deliveries in October 1958.
This was not quite the last Rolls-Royce model to be supplied as a "chassis only" ready for a wide variety of bespoke coachwork designed and made by a rapidly declining number of specialist coachbuilders. Most of the bodies selected used "formal" limousine designs.
Automatic transmission
Initially only a four-speed manual gearbox was offered, but this was supplemented by a General Motors Hydramatic automatic option from 1952.
Silver Dawn
From 1949 until 1955 customers wishing to buy their Rolls-Royce car fitted with the much smaller standard steel body could purchase Rolls-Royce's Silver Dawn. It was almost identical to Rolls-Royce's Bentley Standard Steel saloon that had been available alongside the Silver Wraith since July 1946. The Silver Wraith chassis was seven inches longer.