Name Racer-class sloop Succeeded by Greyhound-class sloop In commission 1856 - 1877 | Preceded by Swallow-class sloop Built 1855 - 1860 Completed 5 | |
 | ||
The Racer-class sloop was an 11-gun wooden screw sloop class of five ships built for the Royal Navy between 1855 and 1860.
Contents
Design
Built of a traditional wooden construction, the Racer class were a lengthened version of the Swallow-class sloop, which in turn had been intended as "type of screw vessel below the Cruizer". The extra length gave greater speed, and combined with a considerable increase in power, this gave a speed of about 10 knots (19 km/h), rather more than the 7 knots of the previous class.
The class were armed with a single 32-pounder gun (58cwt) gun on a pivot mount and ten 32-pounder (25cwt) carronades on the broadside. These guns were all smoothbore muzzle-loading, and were little changed from the standard guns of Nelson's era.
Propulsion was provided by a two-cylinder horizontal single-expansion steam engine developing 461 indicated horsepower (344 kW) and driving a single screw. At maximum power under steam, top speed was about 10 knots (19 km/h). A barque rig of sails was carried, which meant the ships of the class had three masts with a square rig on the fore and main masts.
Ships
The first three ships were ordered on 3 April 1854, although both Cordelia and Gannetwere ordered as Swallow-class sloops, with the design being changed before construction. Icarus was ordered on 3 February 1855 and Pantaloon was ordered on 1 April 1857.