In service 1867-190? Manufacturer Royal Arsenal | Used by Royal Navy Variants Mk I, Mk II | |
 | ||
Type Naval gun
Coast defence gun Wars Bombardment of Alexandria (1882) | ||
RML 11 inch 25 ton guns were large rifled muzzle-loading guns used as primary armament on British battleships and for coastal defence. They were effectively the same gun as the RML 12 inch 25 ton gun, bored to 11 inches instead of 12.
Contents
Design
Mark I was introduced in 1867. Mark II was introduced in 1871 using the simpler and cheaper "Fraser" gun construction method which had proved successful with the RML 9 inch 12 ton Mk IV gun.
Naval service
Guns were mounted on :
Ammunition
When the gun was first introduced projectiles had several rows of "studs" which engaged with the gun's rifling to impart spin. Sometime after 1878, "attached gas-checks" were fitted to the bases of the studded shells, reducing wear on the guns and improving their range and accuracy. Subsequently "automatic gas-checks" were developed which could rotate shells, allowing the deployment of a new range of studless ammunition. Thus, any particular gun potentially operated with a mix of studded and studless ammunition.
The gun's primary projectile was 536 - 543 pound "Palliser" armour-piercing shot, which were fired with a "Battering charge" of 85 pounds of "P" (gunpowder) or 70 pounds of "R.L.G." (gunpowder) for maximum velocity and hence penetrating power. Shrapnel and Common (exploding) shells weighed 532 - 536 pounds and were fired with a "Full charge" of 60 pounds "P" or 50 pounds "R.L.G.".