Mill location TL 931 694 Type Tower mill No. of sails Four Sails Auxiliary power Steam engine | Purpose Corn mill Storeys Five storeys Year built 1831 | |
 | ||
Operator(s) Friends of Pakenham Windmill | ||
Pakenham windmill aerial view
Pakenham Mill is a Grade II* listed tower mill at Pakenham, Suffolk, England which has been restored and is maintained in working order.
Contents
History
Pakenham Mill was built in 1831. Clement Goodrich was the miller in 1846, when he took on an apprentice. The mill came into the ownership of the Bryant family in 1885. A steam engine was used as auxiliary power. In 1947, the mill was nearly tail-winded, but the miller managed to turn the cap in time to avoid this happening. The mill was restored in 1950, with a new weatherbeam fitted by Amos Clarke, the Ipswich millwright. At this time the swing-pot neck bearing from Buxhall mill was installed. A second-hand stock from Thurston post mill was fitted at this time and a gallery constructed around the cap. The gallery was based on that at Wendover mill, Buckinghamshire. New sails were also fitted.
Further restoration took place in 1961, aided by grants from Suffolk County Council, the Ministry of Works. The work was conditional on the Bryant family continuing to work the mill. The restoration work was carried out by R Thompson & Sons Ltd, millwrights of Alford, Lincolnshire. The copper covered cap was rebuilt and clad in aluminium for maintenance reasons. A new stock and two new sails were made, and the fantail rebuilt. The mill was struck by lightning in June 1971, a stock being split and a sail damaged. The sack chain saved the mill from being burnt down by giving a route for the lightning to earth. When the mill was repaired, a lightning conductor was added to the mill.
The most recent restoration of Pakenham windmill was completed in May 2000. The £60,000 cost of the work was 80% funded by the Heritage Lottery Fund. The work was carried out by Thompson's of Alford.
Description
Pakenham Mill is a five storey tower mill. It has a domed cap with a gallery and is winded by a fantail. Two of the three pairs of millstones remain. The governors for the millstones are driven by chains instead of the more usual belt.
Millers
Public access
The mill is open to the public daily "during working hours" for individuals, and by appointment for parties. It is open on both Saturday and Sunday of National Mills Weekend from 14:00 to 17:30.