Place of origin United States Designer Oshkosh Manufacturer Oshkosh Corporation | In service May 2017 (projected) Designed June 2012-May 2013 | |
 | ||
Type Aircraft Rescue and Fire Fighting (ARFF) vehicle | ||
The Oshkosh P-19R is an Aircraft Rescue and Fire Fighting (ARFF) vehicle and it was selected by the U.S. Marines in 2013. The first fielding will occur in May 2017 and on entering service the P-19R will serve as a first-response vehicle in aircraft fire emergencies at military bases and expeditionary airfields.
Contents
History
Oshkosh announced on May 30, 2013 that it had been selected by the US Marine Corps to supply its next-generation Aircraft Rescue and Fire Fighting (ARFF) vehicles. The P-19 Replacement (P-19R) will replace the Oshkosh P-19A fleet which was first fielded in 1984 and is reaching the end of its service life. The P-19R contract extends through May 2018 and has a total estimated value of $192 million ($192,852,826 quoted). Between 164 and 200 vehicles could be ordered.
Following the delivery of three prototype vehicles in December 2013 for testing, in April 2015 it was disclosed the P-19R had successfully completed all required government development testing and evaluation and readiness reviews required to move the program through Milestone C approval and into Low Rate Initial Production (LRIP). A delivery order was placed and LRIP commenced that month, with vehicles slated for delivery to support Product Verification Testing (PVT). Six LRIP vehicles were delivered in February 2016 to the Aberdeen Test Center in Aberdeen Maryland for PVT and Cherry Point North Carolina for First Unit Equipped (FUE) testing. Testing was conducted from March 2016 through June 2016. A Full Rate Production (FRP) decision was announced by Oshkosh on August 18, 2016, with the first P-19R fielding scheduled for Camp Pendleton California in May 2017. The contract with Oshkosh extends through 2018.
Technical description
The P-19R is based on a conventional C-section rigid chassis, the wheelbase of which is 4.851 m. Motive power is provided by a rear-mounted transverse 15.2-litre Caterpillar C15 six-cylinder in-line turbocharged, water-cooled four-stroke diesel, developing 600 hp (448 kW),. this coupled to an Allison 4700 SP seven-speed fully automatic transmission and Oshkosh 35000 Series single-speed transfer case. This set-up is shared with Oshkosh’s Logistic Vehicle System Replacement (LVSR), this also in service with the Marines.
Suspension is Oshkosh TAK-4 fully independent double wishbone all-round, and by coil springs with 16-inches of independent wheel travel. TAK-4 suspension is fitted to the Marines’ LVSR and Medium Tactical Vehicle Replacement (MTVR) fleets, and is also fitted to the Oshkosh M-ATVs and upgraded Cougar MRAPs that are being retained by the Marines post-Afghanistan. The P-19R is fitted with Michelin XZL 1600 R20 tires. A Dana central tire inflation system (CTIS) is fitted, this allowing the driver to adjust tire pressures to suit the terrain being crossed. A spare wheel/tire is carried at the rear of the vehicle.
The cab seats four, a driver and three crew. The driver sits centrally.
The P-19R is equipped with a power divider that allows the vehicle to drive and pump simultaneously. In addition to hoses, ladders and other fire and rescue equipment, the P-19R carries 1000 gallons of water, 130 gallons of foam agent, and 500 lb of Halotron auxiliary firefighting agent. The roof and bumper turrets combined, will discharge up to 750 gallons of water per minute, and at up to 1000 ft from a fire.
Cross-lay hose beds in the main body offer convenient access to fire hoses that can be used for structural fires or to draw water from a hydrant or natural source such as a river or pond. On the underside of the P-19R there are nozzles that can discharge 56 liters of water and foam to extinguish a fire or fuel spill underneath the vehicle. In front of the vehicle Oshkosh has installed nozzles that spray water and foam on the windshield to keep it cool.
The P-19R is also equipped with Oshkosh's Command Zone integrated control and diagnostic system originally developed for the company's commercial fire-fighting vehicle in 1999. Command Zone is a computer-controlled, electronics technology that operates and diagnoses all major vehicle networks. The backbone of the system is multiplexing technology that allows vehicle components to work in concert, streamlining diagnostic and troubleshooting efficiencies. Both a local and remote monitoring system, it allows real-time access to critical vehicle information via command and control networks, laptops, on-board display screens or hand-held personal digital devices.