Crosses North Arm Fraser River Preceded by Marpole Bridge (first) Opened 3 July 1957 Location Vancouver Body of water Fraser River | Locale Vancouver
Richmond Design girder bridge Province British Columbia Bridge type Girder bridge Carries Pedestrian, Bicycle | |
 | ||
Maintained by British Columbia Ministry of Transportation Similar Arthur Laing Bridge, Knight Street Bridge, George Massey Tunnel, Queensborough Bridge, Alex Fraser Bridge | ||
The Oak Street Bridge is a four-lane bridge crossing the Fraser River connecting Vancouver to Richmond in British Columbia. The main spans are heavy steel deck plate girders continuous over three spans of 60.9, 91.4 and 60.9 metres. The bridge is a part of Highway 99.
Contents
Map of Oak St Bridge, British Columbia, Canada
History
The Oak Street Bridge opened in June 1957. During the planning, it was the "New Marpole Bridge" and steel plate girders salvaged from the second Granville Street Bridge made barges for constructing the foundations of the Oak Street Bridge.
After the bridge opened, traffic began to move several blocks to the east. The business districts along Hudson Street and Marine Drive went into a swift decline.
Tolls were charged for two years and $1 million was collected in the last year. Tolls were removed from all of the bridges in the Lower Mainland in the 1960s, although the recently opened Golden Ears and Port Mann bridges utilize electronic tolling systems.
The Oak Street Bridge was meant to partially replace the Marpole Bridge, just to the west, connecting Vancouver to Sea Island, on which the Vancouver International Airport is located. The Marpole Bridge was dismantled the same year the Oak Street Bridge opened.
In 1995 two lanes of the bridge were closed alternately for resurfacing the concrete deck. A median barrier and higher curbs were also installed, and its earthquake resistance was enhanced.