Production 1978–20052013–present | ||
 | ||
Class Subcompact car (1978–1995)Compact car (1995–2005, 2013–present) | ||
The Nissan Pulsar is a subcompact and compact car produced by the Japanese automaker Nissan from 1978 until 2000, when it was replaced by the Nissan Bluebird Sylphy in the Japanese market. Between 2000 and 2005, and then since 2012, the name "Pulsar" has been used in Australia and select Asian countries on rebadged versions of the Sylphy and similar Tiida model. In 2014, a European-only replacement for the Tiida was introduced using the Pulsar nameplate.
Contents
- N10 N11 19781982
- Datsun 310
- N12 19821986
- N13 19861990
- N14 19901995
- Marketing
- GTI R
- N15 19952000
- Trim levels
- C13 2014present
- Other versions
- N16 20002005
- B17 2013present
- C12 2013present
- References
The original Pulsar was a hatchback to be sold exclusively at a different Nissan Japan dealership network called Nissan Cherry Store as a larger five-door hatchback alternative to the Nissan Cherry. Although Pulsar models were front-wheel drive from introduction, Nissan did offer four-wheel drive as an option on select models internationally.
The Pulsar sold in Japan originally served as the intermediate model offered at Nissan dealerships Nissan Cherry Store between the Nissan Violet and the Cherry, while different versions of the Pulsar sold at other Japanese networks served as the base model, with other larger Nissan products. Various Pulsar-based models were exported as international market conditions dictated, sometimes labeled as "Sunny", "Cherry" or "Sentra", while the internationally labeled product was actually a Pulsar and not a Japanese market Sunny or Cherry.
A pulsar (portmanteau of pulsating star) is a highly magnetized, rotating neutron star, as the Nissan Pulsar was built from the Sunny sedan.
N10, N11 (1978–1982)
The N10 model Pulsar, introduced in May 1978, replaced the earlier Cherry F-II internationally, and benefited from the engineering efforts of the Prince Motor Company which developed the Nissan Cherry before the company merged with Nissan in 1966. It retained the rack-and-pinion steering of the Cherry, as well as the independent suspension with coilover struts in front and coil sprung trailing arms at the rear. It retained the Cherry name in Europe and many other export markets, even being sold as the "Cherry Europe" in some markets such as Belgium to separate it from the Cherry F-II which remained on sale for a while. The "Cherry"-badged version was first introduced at the Dutch AutoRAI show in February 1979 and went on sale shortly thereafter. The Pulsar was a subcompact car to augment the Sunny sedan. An unusual styling feature for the car was its long nose, which was due to Nissan envisaging that the car would also be built a with longitudinal rear-wheel-drive layout for developing markets; however, only front-wheel-drive models were actually built. At the time of introduction, the Pulsar only had a four-door fastback-styled sedan bodywork, and either a 1.2- or a 1.4-liter engine. The two-door and the coupé arrived in September 1978. Many export markets also offered a 1.0-liter option, with 45 PS (33 kW) while the 1.2 offered 52 PS (38 kW).
The N10 series Datsun Pulsar was exported to Australia (from October 1980 and facelift in October 1981), New Zealand (facelift model locally assembled from late 1981, effectively replacing the previous generation 100A built and sold locally in the mid-1970s), South Africa (locally assembled) and Malaysia with the Datsun Pulsar name. This model was known as the Datsun Cherry or Datsun 100A/120A/130A/140A/150A in Europe and Asia and the Datsun 310 in the US and Canada. The Pulsar was a companion platform to the Nissan Sunny. Both the Sunny and the Pulsar were sold at different Nissan Japan dealerships, called Nissan Satio Shop for the Sunny, and Nissan Cherry Shop for the Pulsar.
Another Pulsar derivative was introduced to Japan, called the Nissan Langley, from 1980, and was introduced as a "mini Skyline", and exclusive to Nissan Prince Shop. The Japanese-market Langley assumed duties of the first generation, Sunny-based coupe called the Nissan Silvia when the second generation Silvia was upgraded to the larger Nissan Violet platform; both the Silvia and the Langley remained exclusive to Nissan Prince Store locations. According to the corresponding Nissan Langley article in Japanese Wikipedia, the Langley was given its name from Samuel Pierpont Langley the inventor of the bolometer, a device used to measure electromagnetic radiation from the Sun, and was well regarded for his work in solar physics. Because of its sporting intensions, the Langley was equipped with an independent suspension at all four wheels, using MacPherson struts in the front, and a trailing arm coil suspension for the rear. The engine choices consisted of the A14 and E15 series engines with multi-point fuel injection on top level trim packages, but only in a three-door hatchback.
The N10 series Pulsar was available as a three- or five-door hatchback, a short-lived four-door fastback sedans, a five-door van or station wagon, and a three-door fastback-styled coupé with a wraparound rear window introduced at the end of 1978. The van was first released in November 1978, while the export-only wagon models first appeared in early 1979. Originally the lineup consisted only of the four-door sedan which utilized the same body profile as the later hatchback models; in August 1978 the coupé and three-door hatchback models were added, along with a fuel injected version of the 1.4-liter engine. One year later a five-door hatchback appeared, replacing the four-door sedan which was immediately discontinued.
Most markets outside Japan did not receive all versions: for instance, the three- and five-door hatchbacks and the coupé were the only models to be offered in the US. Most markets never got any fuel injected versions. The 1.0-liter A10 (later also updated to an OHC engine, called E10) was never available in Japan, mainly restricted to markets where tax codes made smaller engines necessary. An interesting anomaly of the French automotive taxation system is that while the A12A-engined Cherry sedans were considered as "6 CVs", the coupés with the same engine were markedly cheaper to own as they were classified as "5 CVs". An unusual feature at the time of introduction was the split folding rear seat fitted to better equipped models, increasing versatility.
A late-term facelift in March 1981 brought Nissan's newly developed OHC E-series engines in for the last twelve months of production. The facelift involved a new grille and rectangular headlamps. The updated 1982 model Pulsar five-door hatchback with E-series engine was assembled in New Zealand at Nissan's new factory-owned assembly plant in Wiri, Auckland. Only one well-equipped model was offered, with a five-speed manual gearbox.
In 1982 "Nissan" badges began to appear on the cars, due to Nissan phasing out the Datsun name at that time for its international markets. Production of the N10 series ceased in mid-1982, to be replaced by the all-new N12 Cherry/Pulsar.
In Japan the five-door van received the VN10 chassis code when shown in November 1978, but was then re-released in August 1979 in a version which met the 1979 commercial vehicle emissions standards—this model was designated VN11. While domestic market passenger models only received the slightly larger A12A engine, the vans retained the smaller A12 engine (and the option of the larger A14) as also used in the preceding Cherry F-II. The van was unusual in the Japanese market for the period in being front-wheel drive; Nissan made the most of this and gave it a special rear suspension to allow for a very low loading floor. To further lower the rear opening the rear bumper was also extremely slim. This generation Pulsar van also provided the basis for the first generation of the Prairie people carrier. This van bodywork, with more comfortable fittings, was also used for the wagon model as sold in export markets. After the March 1981 facelift, the van also received the updated E13 and E15 OHC engines and now carried the VUN10 and VMN10 chassis codes.
Datsun 310
In North America the N10 Pulsar was originally sold only with the largest, 1.4-liter engine and only with four- or five-speed manual transmissions. Called the Datsun 310, in Canada it was also available with Pulsar striping on the rear quarters. Equipment levels were Deluxe or GX, and originally only the three-door hatchback or hatchback coupé bodywork were available. Only the three-door (called a "two-door sedan hatchback" in period materials) was ever available in Deluxe trim, with the GX being optional and all other bodystyles only sold in GX trim. A four-speed manual was installed in all sedans, while the GX Coupé received a five-speed unit. The three-door GX was unusual in receiving manual, remotely controlled (from the center console, behind the parking brake) rear side windows.
For 1981 the Pulsar received a facelift in North America, with a sloping, horizontal bar grille and rectangular headlights in place of the previous round units. A five-door hatchback ("sedan hatchback") model was now also available, only in GX trim. A larger 1.5-liter engine replaced the earlier 1.4-liter unit, although in desmogged form it only produced 65 hp (48 kW). This was still a pushrod unit (unlike the new E-series which was on its way into the Pulsar in the rest of the world), with a two-barrel carburetor and a catalytic converter. The 310 never stood a great chance in North America, where the cheaper and somewhat larger rear-wheel-drive 210-series always outsold it. The lack of an automatic option was a further hindrance in the US market.
N12 (1982–1986)
A more angular version was announced in April 1982, making its European debut in October. By this time, Nissan had more or less standardised its naming policy worldwide, so as a Nissan it tended, excepting European markets, to be known as a Pulsar. In Europe it retained the "Cherry" moniker, and in Malaysia and South Africa it was sold as the Nissan Langley. This generation Pulsar sedan or hatchback was sold in North America only for model year 1983.
New Pulsar models were introduced in the Japanese home market. The Nissan Langley, in its second generation, was a Pulsar sold at Nissan Prince Store locations next to the Skyline, and shared many styling influences from the Skyline. The Japanese market Langley added a five-door hatchback body style to the popular three-door hatchback. A two-door coupe was also added alongside the Pulsar at Nissan Cherry Store locations called the Pulsar EXA in 1983. Nissan also offered the Langley EXA at Nissan Prince Store locations.
The market acceptance of the Langley inspired Nissan to sell a second badge engineered version at Nissan Bluebird Shop as the Nissan Liberta Villa, replacing the larger Nissan Stanza clone, called the Nissan Violet Liberta. The Liberta Villa was only available as a sedan, offered as a smaller companion to the Nissan Leopard (itself a Skyline clone). The top trim package was the SSS turbo with the E15ET engine, and the top two trim packages offered multi-port fuel injection with the base model offering a carburetor—all with the 1.5-liter petrol engine. A diesel engine was also offered on the Liberta Villa, using the CD17 engine.
The Australian market Pulsar N12 series arrived in October 1982. Offered as a five-door hatchback, 1.3-liter TC and 1.5-liter TS specifications featured. These early cars were manufactured in Japan. May 1983 saw the debut of an update to the Australian range. Now produced locally, the update heralded minor trim changes, suspension and steering revisions and new seats. Specification levels were overhauled with the Pulsar E opening up the range with its 1.3-liter engine, followed by the 1.5-liter GL and GX. In October 1983 the sedan body was introduced in GL and GX guises (1.5-liter). A turbocharged Pulsar ET five-door arrived in April 1984, sharing its engine and trim with the EXA. It was only available with a five-speed manual. The ET also had alloy wheels, a modified suspension and various aerodynamic improvements. The engine was imported fully built from Japan, which placed a limit on how many ETs could be built without falling foul of laws on local content.
The next update came in August 1984 alongside a badge engineered twin, the Holden Astra (LB)—a scheme devised under the Button car plan. To differentiate the Pulsar, Nissan Australia applied the upmarket Japanese market Langley body details for its facelift. The headlamps were now fitted as quad units and narrower horizontal tail lamps distinguished the rear styling. Other changes included an increase in specification, minor suspension calibrations, and refreshed interior trims. Sedan versions had their facelift delayed until November that year, and the ET hatchback lingered on with the older styling until the demise of the N12 in 1987. The Australian-built Pulsar ET was also exported to New Zealand, beginning in 1985.
The final Australian N12 update arrived in April 1986 prior to the 1987 N13 introduction. The Holden version was known as the LC Astra. The revisions brought further trim changes, tweaks to the five-speed manual transmission, new colours, a new entry-level DX model, a change from GX to GXE, and the introduction of a larger displacement 1.6-liter engine tuned for unleaded petrol replacing the 1.3- and 1.5-liter leaded units used previously. The ET model also saw its 1.5-liter turbocharged engine updated for unleaded fuel.
The N12 was assembled in New Zealand at Nissan NZ's plant in Wiri South Auckland from 1982, and facelifted in 1984 when the main change was a switch to the now compulsory laminated windscreen. This generation was offered in both three and five door hatchback form with both 1.3- and 1.5-liter Nissan E-series engines shared with the also locally assembled Sunny sedan (NZ did not import the equivalent Pulsar sedan). The Holden Astra badged variant was not sold in New Zealand. The EXA Coupé was a limited official Nissan import new but thousands more Japanese market specification models arrived in the later 1980s and early 1990s when the NZ market was opened up to used imports.
The European market Cherrys were available with engines ranging from a 1.0-liter, 50 PS (37 kW) petrol unit to the 114 PS (84 kW) turbocharged 1.5-liter E15ET and also included the diesel CD17. The Cherry Turbo was an attempt at breaking into the then very popular GTi category, but being a somewhat half-hearted effort it did not have much of an impact in the marketplace. The Turbo sat on comparatively skinny Dunlop tires and had few changes aside from lots of stickers and the turbocharger. Period tests complained about peaky power delivery (and the same long gear ratios as for the regular Cherry), torque steer, and a harsh ride. The Pulsar/Cherry underwent a light facelift in July 1984.
This model was also built in Italy by Alfa Romeo as the Arna (named after the joint venture which created it, Alfa Romeo Nissan Autoveicoli), using Alfa Romeo boxer engines. Confusingly, the Italian models were also sold in the United kingdom and Spain as the "Nissan Cherry Europe". At Alfa Romeo, the Arna was meant to replace lesser versions of the popular Alfasud, but never had the Italian car's appeal. The Cherry Europe also failed in its "home" market (Europe) lacking the build quality and reliability of its Japanese built twin car.
N13 (1986–1990)
In 1986, Nissan's design chief refused to follow the smoother, aerodynamic look of other cars, and told his design team to come up with an affordable, subcompact car. A squarer Pulsar N13 series was released as a result; innovations included a permanently four-wheel drive model with a viscous coupling which appeared in May 1986. In February 1987 a version with three viscous couplings was introduced: one for each axle and one in between. This was originally limited to a production of 200 cars, at a price increase 50 percent higher than for the regular four-wheel-drive version. For 1988 it became a regularly available model; this was very similar to the Attesa system which first appeared in the Bluebird soon thereafter. In 1986, the Pulsar won the Car of the Year Japan award. Capitalizing on the popularity of the larger R31 series Nissan Skyline, this generation shares many visual styling cues with the larger car.
The N13 series EXA was spun off as its own model internationally, but retained the Pulsar NX name in the United States. It was designated as the N13 series, despite actually being based on the Nissan Sunny (B12) chassis.
The Pulsar was sold in Japan as a three- and five-door hatchback, plus a four-door sedan. There was no turbocharged version of the N13 Pulsar, with Nissan choosing to focus on multivalve engines instead. In April 1988, the 1.5-litre engines were changed to the new GA generation.
The Langley and the Liberta Villa (both sold as sedans and three-door hatchbacks) also continued sales in Japan as upmarket versions of the Pulsar, with a limited engine lineup. Both the Langley and Liberta Villa had slightly different bodywork to the Japanese-specification Pulsar—although most parts were interchangeable. Langley and Liberta Villa three-doors sported completely redesigned rear-ends, which were slightly longer and tapered off in a notchback-like manner and were much sportier in appearance with their more steeply raked rear windows. The sedans featured reshaped upper doors (windows), rear windshields, rear quarter panels, and are noted for the repositioning of the license plate to the rear bumper from the boot lid. The Langley and Liberta Villa were themselves differentiated by their own frontal styling. Compared to the Pulsar, the Langely had narrower trapezoidal-shaped headlamps and a unique grille—whereas the Liberta Villa had narrow rectangular-shaped lights and again its own grille design. The N13 Langley and Liberta Villa featured other options such as a limited-slip differential, luxurious interior and the much sought-after black headlights on the Langley, centre grille and round Skyline-style taillights, with the equipment shared in the Liberta Villa. The Japanese-market Langley five-door hatchback was dropped with the N13.
In Malaysia, the N13 Pulsar was sold as the Nissan Sentra, which introduced in 1987 to replace the slow selling B12 Sentra.
In South Africa, the Pulsar was sold as the "Nissan Sabre". There were three- and five-door hatchbacks and a four-door sedan.
The Pulsar–Astra relationship continued in Australia, with the series there continuing to use the more upmarket Langley sedan as the donor vehicle. The sedan version was called the Pulsar Vector. The five-door hatchback was also offered, but this model differed from the Japanese Pulsar with reshaped upper doors (windows) and rear quarter panels. The development of the model was a collaboration with Holden, using the Family II engine built in Australia. Nissan introduced a facelift in 1989. After Holden ended their cooperation with Nissan in 1989 (and took up with Toyota instead), sales of the Holden Astra came to an end. Nissan Australia, however, kept using the GM engines until the succeeding N14 version was introduced.
four-cylinder engines offered in the Australian built version were:
In New Zealand, the previous Sunny and Pulsar ranges were replaced by a single model line now called the Nissan Sentra—which were based on the Japanese market Pulsar and again mostly locally assembled, all with Japanese-manufactured Nissan engines. Versions in New Zealand were available in four body shapes; three-door hatchback (SG, SR), five-door hatchback (SGS, ZXE), four-door sedan (SG, SGS, ZXE), and a five-door "Sportwagon" (SG, SGS).
Six engines were offered over this generation:
In Europe, the N13 Pulsar was usually sold under the Nissan Sunny name- however, this was not the same car as the Nissan Sunny (B12) sold elsewhere around the same time. In some markets (such as Greece), the N13 Pulsar retained the Cherry nameplate. The top version, called the Sunny GTi, initially had the 1.6-litre 16-valve engine with 110 PS (81 kW) at 6400 rpm. The GTi was quite discreet, with external changes limited to side skirts and small spoilers front and rear, as well as alloy wheels. It was not a particularly strong contender in th GTi market, to rectify this Nissan later introduced a more powerful and torquier 1.8-litre version.
N14 (1990–1995)
In 1990, the N14 model saw Nissan turn to a more rounded design. The Langley and the Liberta Villa were replaced with the Nissan Primera, assigning the Primera to Nissan Prince Shop locations.
This version of the car was launched in the United Kingdom as the Nissan Sunny from March 1991, the last generation of Sunny to be sold in the United Kingdom, where it was replaced late in 1995 by the Almera. One anomaly from this period resulted from Nissan taking control of its British import and distribution business from Automotive Financial Group (AFG); the acrimonious split between Nissan and Octav Botnar resulted in AFG sourcing the vehicle badged as the Pulsar and selling it concurrently in the UK alongside the "official" version (badged as the Sunny) by the newly established Nissan Motor GB.
This version continued to be offered in CKD kit form in New Zealand as the Sentra (unrelated to the version sold in North America). In Europe, the Sunny name continued, applied to three-door hatchback, five-door hatchback and four-door sedan models, alongside the separate model line Sunny California station wagon from Japan (called either the Sunny Estate or Sunny Traveller).
There was no N14 Pulsar offered in the United States or Canada either; instead, the North American Pulsar for those markets evolved into what was known as the NX1600. The NX cars are sport coupés sharing the same chassis, engines, body electronics and even dashboard with the Pulsar N14.
The Taiwanese Pulsar was manufactured by Nissan's Yulon subsidiary under their AREX brand – where it used the same engines as the Japanese version.
Marketing
In Japan, the N14 range was large, comprising eight different models with a total of eighteen available variations, including six different engines, three body shapes, and two drivetrains.
In Australia, the N14 (aka ES) was available in four models, all front-wheel drive only, in either four-door sedan or five-door hatchback variations. Nissan Australia assembled the range that sold from October 1991 through to February 1993 at their factory in Clayton South, Victoria. Similar models with unique specifications and Sentra badging were shipped to New Zealand where a wagon version, sourced from Japan and assembled locally, was also offered. After Nissan closed the Clayton South plant in October 1992 for financial reasons, the models (known as the "Series 2") were imported from Japan and sold in Australia until September 1995, while Nissan NZ imported its own versions in CKD form to sell alongside the locally assembled wagon until the plant in Wiri, South Auckland shut down in 1998. Unlike the N13 Pulsar/Astra, Holden in Australia did not use a variant of this Pulsar, instead choosing to use a rebadged variant of the rival Toyota Corolla, which they sold as the Holden Nova until the late 1990s when they reintroduced the Astra name for their variant of the Opel Astra. The Pulsar N14 was awarded Australian Wheels magazine's Car of the Year in 1991, an honour it shared with the Honda NSX.
In South Africa the N14 (aka ES) was built locally by Nissan South Africa. It was only available with FWD as a four-door sedan (badged Sentra) and five-door hatchback (badged Sabre). Originally released in 1994, and given a cosmetic facelift in 1997 rather than being replaced with the N15, it was produced until 2000 and also exported to Namibia.
GTI-R
The N14 series also saw the introduction of the Nissan Pulsar GTI-R three-door hatchback (chassis code E-RNN14 in Japan, and badged as Sunny GTI-R in Europe with chassis code EGNN14). This was a homologation variant produced between 1990 and 1994 in order to enter the WRC under Group A rules at that time. It featured the turbocharged 2.0-liter SR20DET engine producing 169 kilowatts (227 hp) and 29 kg·m (280 N·m; 210 lb·ft). The body is largely the same as the standard N14 three-door model, but distinguished by the large rear wing and bonnet scoop. It has an ATTESA all-wheel drive system and a unique variant (coded 54C) of the SR20DET engine (not used on any other car). With a power-to-weight ratio of 0.083 and AWD, the standard GTI-R is able to accelerate from 0–100 kph in the 5-second bracket, and cover the standing quarter-mile in the 13-second bracket (Nissan never quoted the official figures but Best Motoring magazine conducted several tests with standard cars during production). Top speed is officially stated as 232 km/h (144 mph).
There were two distinct models of the Pulsar GTI-R sold to the general public, identifiable by the model number found on the VIN plate located on the firewall in the engine bay. There are no external visual differences.
Other versions:
After NME was disbanded, the cars were sold to private buyers, predominately in Europe, where some made their way into rallycross events. Tony Bardy is currently still competing in UK rallies using the "J3" NME car.
The Pulsars were manufactured in Japan between August 1990 until November 1994. The total number produced during that time was somewhere between 12,000 and 15,000. It is unclear how many of them were RA and RB models.
The first year of production (1990–91) was the largest due to Nissan needing to fulfil the FIA Group A regulations (of 5,000 models total, with 500 of them homologated) in order to enter the model as a manufacturer in the WRC.
The RHD Sunny models for Europe were produced from 1992 until January 1995. No recorded data has been found for LHD models. No verifiable evidence has been available of Sunny GTI-R production numbers, but it is generally accepted that less than 1000 were produced in total. They were officially sold in the UK, Germany, the Netherlands, Iceland, Italy and France.
Nissan Sunny was the badge used for the European-delivered GTI-R. They had a different chassis number of EGNN14. The engine output specifications (220 PS / 162 kW and 267 Nm / 197 lb·ft) were slightly less due to the electronic control unit having different fuel and ignition maps to compensate for the lower octane fuel available in those areas. The Sunny GTI-R had several physical differences to the Pulsar, such as the rear number plate surround and rear fog lights. The interior also varied from the Pulsar with some of the more basic trim from the RB model.
N15 (1995–2000)
In 1995, the N15 Pulsar was launched as a compact car, rather than subcompact, and sold in Europe as the Nissan Almera. The New Zealand Nissan Sentra changed name to Pulsar after the Nissan assembly plant in Wiri, Auckland closed down in 1998, in favour of imports from Japan. Again, four- and five-door models were offered, with three-door models being available in Europe and Japan only, and not Australia and New Zealand. North American customers did not receive this car, with the Sunny-based Sentra B14 being sold there instead.
The chassis designation "N" series carried over to the Bluebird Sylphy (N16) in 2000 for the Japanese market.
The Australasian versions included the LX, SLX, Q and SSS variants. New Zealand specific versions included the S and SE variant. The SSS model (5-door hatch only) featured the SR20DE engine featuring 105 kW (141 hp)/179 Nm.
The station wagon continued to be from the Sunny, later spun off in Japan into the Nissan Wingroad.
Trim levels
In Japan, the N15 was available under numerous nameplates, giving Nissan in Japan the opportunity to sell the Pulsar at two different Japanese network dealerships, called Nissan Cherry Store that sold the Pulsar, and Nissan Satio Store that sold the Lucino. These included:
Lucino BB 3-door hatch (GA15DE engine, exactly same as Pulsar Rezzo, except for rear indicator lens covers being clear coloured). Lucino JJ 3-door hatch(GA15DE engine, exactly same as Pulsar Serie X1, except for rear indicator lens covers being clear coloured). Lucino SR-V 5-door hatch (exactly same as Pulsar SR-V, except rear indicator lens covers being clear coloured). Lucino SR-V VZR 5-door hatch (SR16VE engine)
Pulsar Serie X1 3-door hatch and 4-door sedan (GA15DE engine, indicative features included high stop lamp incorporated into rear spoiler (hatch and sedan) or bootlid (sedan only) and option of driving lights. Front fascia differs to that of Pulsar Serie Rezzo). Pulsar Serie Rezzo 3-door hatch (GA15DE engine, base JDM Pulsar, indicative features include absent rear high stop lamp and front fascia black slatted spotlight covers until 1998 facelift). Pulsar Serie X1R 3-door hatch and 4-door sedan (exactly same as Pulsar Serie X1 and Lucino JJ, except GA16DE engine featured instead of GA15DE). Pulsar CJ-I and Pulsar CJ-II 4-door sedan (GA15DE engine, exactly same as Pulsar Serie Rezzo). Pulsar SR-V 5-door hatch (GA15DE or SR18DE engine, indicative features include rear number plate surround fascia, front nudge bar and two-toned paint scheme). Pulsar GTI 3-door hatch and 4-door sedan (SR18DE engine, indicative features include 15" alloy wheels). Pulsar 5-door hatch (GA15DE engine, exactly same as Pulsar and Lucino SR-V but without two-tone paint, nudge bar and rear number plate surround fascia). Pulsar VZR 3-door hatch (SR16VE engine, available from 1998 onwards only, featured Nissan's NEO VVL technology and 15" alloys from Pulsar GTI, 175 bhp). Pulsar SR-V VZR 5-door hatch (SR16VE engine, exactly same as Pulsar VZR 3-door hatch). A 4-wheel drive option was available in Pulsar SR-V, Lucino SR-V and Pulsar CJ-I, CJ-II and X1 (sedan only) models.
Japanese market N15 Pulsar and Lucino models had drivers airbag as standard. Passenger airbag was an option in 1995 and standard from 1996 onwards. Speedometer became digital from 1998. Tachometer was not present on Pulsar Serie Rezzo, Pulsar CJ-I, CJ-II and Lucino BB models. Air conditioning was standard on almost all models, but could be requested without. Manual adjusting windows were available on Pulsar Serie Rezzo, Pulsar CJ-I, CJ-II and Lucino BB models, otherwise electric windows were standard. Sunroof was available option on Pulsar Serie X1, Pulsar Serie X1R, Pulsar GTI, Pulsar VZR and Pulsar / Lucino SR-V models (hatch only). Manual controlled air conditioning controls were standard, climate control was available as option and standard on Pulsar Serie X1R, Pulsar GTI and Pulsar VZR.
An Autech tuned version of the Pulsar SRV and Lucino SRV was also available featuring the SR18DE block, but was actually a 2.0L (1998cc) engine. Indicative features included the placement of the spare-wheel on the rear boot lid and inclusion of plastic side mouldings over the wheel arches and large rear spoiler. As a result of shifting the spare-wheel to the boot lid, the number plate had to be relocated in the rear bumper, meaning a bumper was produced specific for this model.
Configurations:
The N15 Nissan Pulsar came with the following engine options:
GA15DE — 1500 cc DOHC MPFI. Featured in the New Zealand Sentra S, JDM Pulsar Serie Rezzo, JDM Pulsar Serie X1, JDM Pulsar CJ-I, JDM Pulsar CJ-II, JDM Pulsar SR-V, JDM Lucino BB, JDM Lucino JJ and JDM Lucino SR-V. There was a 4-wheel drive variant of the GA engine series available in the JDM Pulsar SR-V and JDM Lucino SR-V 5-door hatch and some JDM Pulsar CJ-I, Pulsar CJ-II and JDM Pulsar X1 4-door sedans.
GA16DE — 1600 cc DOHC multi-point EFI (sometimes ECCS featured). Featured in the Australian and New Zealand new models Sentra SE, Sentra SLX Sentra Q and JDM Pulsar X1R hatch and sedan variants.
SR18DE — 1800 cc DOHC multi-point EFI. Featured in the JDM Pulsar GTI 3-door hatch and 4-door sedan, JDM Pulsar SR-V 5-door hatch models. 4-wheel drive variant of SR engine series available in JDM Pulsar SR-V model.
SR20DE – 2000 cc DOHC multi-point EFI. Featured in Australian and New Zealand (Australian assembled) Sentra and Pulsar SSS variant delivered with silver/red rocker cover, also called "Red Top" 105 kW @ 6400rpm / 179Nm @ 4800rpm-4800rpm / 0–100 km/h 8.8 secs / Curb weight 1142 kg.
Autech Version SR20DE — 1998 cc DOHC multi-point EFI. Only Sold locally in Japan. Was used in Serie and Lucino Japanese Variants (576 produced total). Featured compression ratio of 11.5:1, 264 duration @ 11.4 mm lift camshafts, unique valve springs, portwork, and unique pistons to achieve high compression. Power is stated at 180 bhp/130 kW @ flywheel. 191 nm@4800rpm.
SR16VE — NEO VVL (Nissan Ecologically Orientated Variable Valve Timing and Lift). Featured in JDM Pulsar Serie VZ-R.
SR16VE N1 — Featured in the JDM Pulsar VZ-R N1, which was a racing homologation version intended to compete with the Honda Civic Type-R. Producing 200 PS (147 kW; 197 hp) from its 1.6 L SR16VE engine, it held the highest specific output ever for a naturally aspirated production car, at 123.125 hp/liter until the Honda F20C engine was released in the Honda S2000. The "Version2" (VerII) was introduced offering a few chassis and mechanical tweaks as well as an option orange trimmed interior with GTR Skyline front seats. N1's available in Black and White only.
The N15 was the last Pulsar generation manufactured under the Taiwanese AREX brand. The AREX Pulsar 150 was only available as an sedan. It was very similar to the Japanese version.
C13 (2014–present)
On 16 May 2014, Nissan announced that the C13 series Pulsar will be launched in Europe. Based on the CMF platform, this model does not replace the C12 version, but is a European-only alternative. European sales began in March 2015. Confusingly, in Russia, the C13 Pulsar has been sold since March 2015, as the C13 series Nissan Tiida.
The new Pulsar signifies Nissan's re-entry into the highly competitive compact hatchback segment, following Tiida's withdrawal from the market in 2011. It marks the first time the Pulsar nameplate has officially been used in Europe. The platform having at various times, carried the Cherry, Sunny and Almera nameplates in Europe over the generations. Initially, the C13 Pulsar is powered by a 113 bhp (84 kW) 1.2-liter DiG-T petrol engine, and a 1.5-liter diesel unit producing 104 bhp (78 kW). In October 2014 Nissan introduced the 1.6-liter DIG-T which develops 140 kW (190 hp). The 1.6 model was launched for sale in March 2015.
The Pulsar is built at Nissan's Barcelona, Spain plant, instead of Sunderland, United Kingdom. In Russia, the Tiida badged version is being assembled in Izhevsk since 19 January 2015.
Its dimensions are: 2,700 mm (106.3 in) wheelbase, 4,387 mm (172.7 in) length, 1,768 mm (69.6 in) width, 1,520 mm (59.8 in) height.
Other versions
Nissan replaced the Pulsar name with Nissan Bluebird Sylphy in Japan in 2000. However, Australia and New Zealand continued with the Pulsar name for the otherwise unchanged Sylphy. This arrangement continued until the introduction of the Nissan Tiida (C11) in 2005; at this time the Pulsar name was retired. In 2013, Nissan replaced the Tiida in Australia and New Zealand with two new models badged as Pulsar. These were based on the Nissan Sylphy (B17) sedan and Nissan Tiida (C12) hatchback, the latter also selling in Thailand under the Pulsar name.
N16 (2000–2005)
In Australia and New Zealand, Nissan continued to use the Pulsar name for the N16 series that was labelled Nissan Bluebird Sylphy in Japan.
B17 (2013–present)
The Nissan Pulsar B17 sedan was released in 2013 and is a rebadged Nissan Sylphy for the Australian and New Zealand markets.
C12 (2013–present)
The Nissan Pulsar C12 hatchback was released in 2013 and is a rebadged Nissan Tiida for the Thai, Australian and New Zealand markets.