Mannlicher M1895

History

It was initially adopted and employed by the Austro-Hungarian Army throughout World War I, and retained post-war by both the Austrian and Hungarian armies. The main foreign user was Bulgaria, which, starting in 1903, acquired large numbers and continued using them throughout both Balkan and World Wars. After Austria-Hungary's defeat in World War I, many were given to other Balkan states as war reparations. A number of these rifles also saw use in World War II, particularly by second line, reservist, and partisan units in Romania, Yugoslavia, Italy, and to lesser degree, Germany. Post war many were sold as cheap surplus, with some finding their way to the hands of African guerrillas in the 1970s and many more being exported to the United States as sporting and collectible firearms. The M1895 bolt also served as an almost exact template for the ill-fated Canadian M1905 Ross rifle, though the later M1910 used a complicated interrupted-thread instead of two solid lugs.

Ammunition

The M1895 was originally chambered in the 8mm M.1893 scharfe Patrone (8×50mmR Mannlicher) cartridge. Between the world wars, both Austria and Hungary converted the majority of their rifles to fire the more powerful 8×56mmR round.
Yugoslavia converted at least some of their captured M1895s to 7.92×57mm Mauser, fed by stripper clips instead of the original model's en bloc clip system. This conversion was designated M95/24 and M95M. The M95/24 is often mistakenly attributed to Bulgaria, but 8×57mm IS was never a standard cartridge of the Bulgarian military. These conversions are prized by collectors for their relative scarcity and chambering in a commonly available round, but suffer from a fragile extractor and a lack of replacement parts.

Variants

For the post World War I conversions see Conversions.

Rifle

The (German: Infanterie Repetier-Gewehr M1895; "Infantry Repeating-Rifle M1895") was the basic variant. It was chambered for the 8×50mmR Mannlicher cartridge. Its iron sights were graduated 300–2600 paces (225–1950 m). It was used during World War I by majority of the Austro-Hungarian Army troops.

Stutzen

This stutzen or short rifle (official designation German: Repetier-Stutzen M1895; "Repeating-Stutzen M1895") was mainly used by special troops (i.e. Storm troops) during World War I. It chambered the 8×50mmR Mannlicher cartridge. Its sights were graduated 500–2400 paces (375–1800 m).

Weight: 3.09 kilograms (6.8 lb)
Length: 1,003 millimetres (39.5 in)
Barrel length: 500 millimetres (20 in)

Carbine

The carbine (official designation German: Kavaliere Repetier-Carabiner M1895; "Cavalry Repeating-Carbine M1895") was chambered 8×50mmR Mannlicher and used by cavalry units of the Austro-Hungarian Army as a replacement of the Mannlicher M1890 carbine. The sights were graduated 500–2400 paces (375–1800 m). Although it originally didn't have bayonet lugs, during World War I it was fitted with stutzen-like front barrel band with bayonet lugs after mounted cavalry units were found ineffective.

Sniper rifle

The main difference from the standard rifle and stutzen was the telescopic sight mount. The scope was mounted slightly to the left so the rifle could be fed by en bloc clip. Approximately 6,000 long and short barreled sniper rifles were made in the years 1915–1918.

Conversions

The M95/30 was a conversion in the First Austrian Republic by Steyr-Mannlicher during 1930–1940. These rifles carry the letter S meaning Spitzer stamped on the barrel. Main modification was the rechambering to 8×56mmR cartridge. Other changes were the conversion of ladder sights from the older pace unit to meters and addition of a brass front sight protector. Many long rifles were cut down to Stutzen length. Most of M95/30s were sent to Bulgaria during 1938–40, where front sight protectors were removed.

The 31.M or M95/31 was a conversion done in the Kingdom of Hungary. Rifles were converted 1931–1935 by FÉG in Budapest and carry the letter H meaning Hegyes Töltény (pointed bullet) stamped on top of the chamber. The conversion included rechambering to the new 8×56mmR pointed bullet cartridge, new metric ladder sights and addition of a front-sight protector. Long rifles were cut down to carbine length and designated 31/a.M. They were not used for much time and were withdrawn to storage when the new 35M rifle was introduced. Some were reissued during World War II. A small number were rechambered but were not cut down for the Hungarian Governmental Guards; these had special long bayonets.

The M95M or M95/24 was a conversion to 7.92×57mm cartridge by the Kragujevac Arsenal in the Kingdom of Yugoslavia. These rifles feature Yugoslavian M24 Mauser barrels, sights, similar handguards and are fed by five-round stripper clips. Their extractors are prone to breakage when being fired single-shot. Some of these rifles were found in the Kingdom of Greece by the German forces during World War II and were mistakenly attributed Greek origin.

Summary

Source:

Bayonet

There were two main variants of the bayonet; the first one was the standard bayonet, the second one was the NCO variant that featured a hooked quillion and a golden lanyard. The overall length was 360 millimetres (14 in) and the blade was 248 millimetres (9.8 in) long. The bayonet was unusual in that the edge faced upwards when mounted on the rifle. Majority of them were made by Œ.W.G. and F.G.GY. Bayonets were originally not serial numbered.

Late in World War I resources were limited and they started manufacturing replacemet (German: Ersatz) bayonets. These were fast to produce, cheap and made completely out of metal.

Night sights

A number of Model 1916 night (Luminous) sights were issued during World War I. The rear night sight is a small brass plate that is placed underneath the rear sight leaf. The front sight clamps around the rifle's front sight base.

Wire destroyer

A Drahtzerstörer or "wire destroyer" device for Mannlicher type firearms was also sometimes issued with the rifle during World War I. During assaults, when soldiers would run into barbed wire obstacles, the "wire destroyer" would grab one of the wires and the soldier would shoot through it. It could only be used with a mounted bayonet.
Various other improvised wire destroyers existed, some originally deisgned for the Mosin–Nagant rifle that were captured on the Eastern front were easily modified to fit the M95. Some were also crafted by military blacksmiths.