A machine state register (MSR) is one of three process control registers present in the PowerPC processor architecture.
Contents
Processors
The implementation details of the machine state register will vary from model to model. Below are two representative implementations, the 32-bit Freescale e200z3 PowerPC core and the 64-bit IBM PowerPC.
Uses of the machine state register
This 32-bit register either controls and/or reports several important processor states.
Reading and writing the machine state register
The contents of the register may be read using the move from machine state register (mfmsr) instruction and may be modified by executing the return from interrupt (rfi, rfci, rfdi), system call (sc) and move to machine state register (mtmsr) instructions.
Uses of the machine state register
This 64-bit register either controls and/or reports several important processor states.
Reading and writing the machine state register
The machine state register can be read using the mfmsr instruction and modified using the mtmsr[d], rfid and hrfid instructions.
Confusion with model-specific register
While the machine state register found in the PowerPC architecture and the model-specific registers found in IA-32 and x86 64 architectures fulfill similar functions and the initialism "MSR" can refer to either, there are important differences that distinguish them. The machine state register, a single register, provides coarse-grained control over a small number of machine functions. In contrast, dozens to hundreds of model-specific registers exist on recent IA-32 and x86_64 architectures and provide a much finer granularity of both reporting and control of machine state. The term "machine state register" does not appear in Intel and AMD documentation; likewise "model-specific register" does not appear in IBM and Freescale documentation.