Wingspan 9.15 m Manufacturer Lockwood Aircraft | Length 6.71 m | |
 | ||
Lockwood drifter airplane
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
Contents
Development
The Drifter was first marketed by Maxair in the 1980s as both a single seat and two seats-in-tandem kitplane. The original single seater was light enough when fitted with the 28 hp (21 kW) Rotax 277 engine to qualify for the US FAR 103 Ultralight Vehicles category, with an empty weight of 240 lb (109 kg).
After Maxair went out of business, the design was picked up in 1997 by Lockwood Aircraft who produced kits for a number of single and two-seat versions, mostly differing by installed engine. The Lockwood versions are all wire-braced using a kingpost to support the ground wires. Over 1000 wire-braced Drifters have been completed and flown.
Lockwood estimates that a builder will take 300 hours to complete a Super Drifter from the currently supplied kit.
Australian developments
From the 1983, Austflight ULA originally based at Ballina, New South Wales began licence production of the Drifter. In 1986, the company moved to purpose built facilities at Boonah, Queensland where they built fully assembled Drifter variants certified by Civil Aviation Safety Authority for the Australian market with powerplants including Rotax 503 to Rotax 582 and Rotax 912 engines. Further improvements led to the Strut Braced (SB) version built to CAO 101.55 class certification in December 1993. The Drifter SB was sold in the USA in the 1990s by Tiger Aviation of Trenton, South Carolina. Over 500 strut braced Drifters were completed and flown.
In late 1995 a joint venture called the Shanghai Fenton Light Aircraft Company (SFLAC) was established with the Shanghai Aircraft Manufacturing Factory for the manufacture of Australian versions in China. Austflight suffered financial losses due to the costs associated with certification and the joint venture agreement. In May 2002 Austflight sold the last of its assets and transferred the Drifter Type Certificate to Noosa Air Pty Ltd. Drifter Aircraft Pty Ltd of Dalby, Queensland was incorporated in 2006 to manufacture and market the Drifter and on the 1st of June 2006 was issued with a production certificate by CASA.
Design
All models of the Drifter are built around an aluminum tube keel, with aluminum tubing making up the keel-to-wing structure. There is no enclosed fuselage; the seats are open to the air. The conventional landing gear includes a steerable tailwheel. Most Drifter kits were delivered with a small fibreglass nose fairing.
The wing is built from aluminum tubing and covered with pre-sewn Dacron sailcloth envelopes. Controls are conventional three-axis, with dual controls and center-mounted control sticks. Lockwood offers optional flaps as part of its STOL kit. The single seat Drifter and XP503 are both stressed for +6/-3g.
With its large wing area the Drifter adapted well to floats and was fitted with several types, including Full Lotus floats. The glide ratio is 9:1.
Operational history
Drifters have been widely used in a number of roles, including recreational flying, agricultural spraying, aerial photography, flight training and banner towing, during which many Drifters have accumulated high numbers of flying hours, leading one reviewer to note: "its long track record has revealed no weakness in the Drifter". A number of Lockwood XP503s have been reported to have exceeded 3000 hours and one Drifter used for banner towing exceeded 10,000 flight hours.
In reviewing the Drifter, Andre Cliche said:
The outstanding aspect of the Drifter is its totally unobstructed view. The pilot sits on the boom tube with all the hardware behind him. This gives the impression of free flight. It is like you are flying a chair. The Drifter has other qualities of course. Its forgiving handling, mechanical simplicity, ease of maintenance and solid airframe all contributed to the Drifter’s good reputation.
Bayerl et al. describe the aircraft as "light in weight, but aerodynamically handicapped", due to its high-drag cable bracing.
Variants
Specifications (Super Drifter)
Data from Lockwood Aircraft & Kitplanes
General characteristics
Performance