Country China Opening date 1958 Impounds Liuxihe River Length 256 m Province Guangdong Province Impound Liuxihe River | Status In use Type of dam Arch Height 78 m Catchment area 539 km² Construction began 1956 | |
 | ||
Location Conghua, Guangzhou, Guangdong Province Address Conghua, Guangzhou, Guangdong, China, 510956 Similar Dalongdong Reservoir, Conghua Liuxi River Water Ro, Tiantang Peak, Shimen National Forest Park, Luogang Xiangxue | ||
The Liuxihe Dam is an arch dam on the Liuxihe River near Conghua, in Guangdong Province, China. The main purpose of the project is hydroelectric power generation with additional purposes of flood control and irrigation. The dam is 78 metres (256 ft) tall and was constructed between 1956 and 1958.
Contents
Construction
In September 1955, planning for dams in the Luixihe River basin began and by January 1956, plans for the Liuxihe Dam were complete. In August 1956, construction on the dam began and excavation commenced the next month and continued until April 1957, removing 680,000 cubic metres (24,013,973 cu ft) of rock and material. The same month that excavation was complete, concrete placement began and continued until September 1958. Earlier in August, the first generator was placed online and the rest were operational by the end of 1958. Originally, the dam support 4 x 10.5 MW generators but in 1993, they were upgraded to 12 MW each.
Design
The dam is a 255.5 metres (838 ft) long and 78 metres (256 ft) high double-curvature arch dam with a crest width of 2 metres (7 ft) and base width of 22 metres (72 ft). The dam is composed of 130,000 cubic metres (4,590,907 cu ft) of concrete and contains seven openings on its surface to discharge water downstream. Each opening is 11.5 metres (38 ft) wide and 4 metres (13 ft) high with a discharge capacity of 141 cubic metres per second (4,979 cu ft/s) each. A 237 metres (778 ft) long discharge tunnel with a maximum capacity of 1,070 cubic metres per second (37,787 cu ft/s) is also built on the dam's right bank.
An axillary dam was built in conjunction with the project in order to protect low-lying areas from the reservoir. It is located about 2 kilometres (1 mi) northwest of the main dam and is an embankment type. The dam is 29.7 metres (97 ft) tall and 220 metres (722 ft) long while having a structural volume of 350,000 cubic metres (12,360,133 cu ft). After the completion of the Huanglongdai Dam in June 1975, the downstream side of the auxiliary dam is now the Huanglongdai Reservoir in which it now serves to regulate both.