Supriya Ghosh (Editor)

Lancia Delta (1911)

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Manufacturer
  
Lancia

Production
  
1911

Also called
  
Lancia Delta

Assembly
  
Turin, Italy

Layout
  
Front-engine, rear-wheel-drive

Engine
  
4,080 cc Tipo 56 I4 (petrol)

The Lancia 20-30 HP (Tipo 56), later renamed Lancia Delta, is a passenger car produced by Italian car manufacturer Lancia during 1911. The Delta was based on the earlier 20 HP Gamma, with an enlarged engine. 303 Deltas were made in total, before it was replaced by the improved 20-30 HP Epsilon.

The Delta was built with two wheelbases, normal and short. The latter was destined for competition-oriented Corsa models, to be bodied as open two- or three-seaters.

Specifications

The Delta was powered by a Tipo 56 side valve monobloc inline-four engine with a cast iron block. Cylinder bore measured 100 mm (3.9 in), and stroke 130 mm (5.1 in)—up 20 mm from the Gamma's Tipo 55—for a total displacement of 4,080 cc (249 cu in). Output was 60 hp (45 kW) at 1800 rpm, and the car could reach top speed of 115 km/h (71 mph).

The transmission was a 4-speed gearbox with a multi-plate wet clutch. The chassis was a conventional ladder frame, with solid axles sprung on semi-elliptic front and three-quarter-elliptic rear leaf springs. The brakes were on the transmission and on the rear wheels.

References

Lancia Delta (1911) Wikipedia