Neha Patil (Editor)

Kern County Chamber of Commerce Building

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
Exhibit Hall

Completed
  
1928 (1928)

Opened
  
1928

Inaugurated
  
29 September 1929

Renovated
  
2010

Address
  
3801 Chester Avenue

Cost
  
$30,000 - $35,000

Owner
  
Kern County, California

Construction started
  
1927

Structural system
  
Reinforced concrete

Kern County Chamber of Commerce Building httpsuploadwikimediaorgwikipediacommonsthu

Location
  
Bakersfield, California

Diameter
  
80 by 40 feet (24 m × 12 m) (Exhibit Hall) 145 by 45 feet (44 m × 14 m) (Total)

Architectural styles
  
Beaux-Arts architecture, Mission Revival architecture

The Kern County Chamber of Commerce Building is a historic building in Bakersfield, California. Located adjacent to Sam Lynn Ballpark and the Beale Memorial Clock Tower, it is a part of the Kern County Museum. The building is considered one of the best surviving examples of architecture by Charles H. Biggar. It is a combination of three architectural styles: Beaux Arts, Mission Revival, and Arts and Crafts . It is listed in the Bakersfield Register of Historic Places (should not be confused with the National Register of Historic Places), which is a local register of historic locations.

Contents

Map of Kern County Chamber of Commerce Building, Bakersfield, CA 93301, USA

History

In the mid-1920s, Kern County decided to build a structure that would showcase both products and innovations from the county. Although it would be the headquarters of the Kern County Chamber of Commerce, the building would be constructed by the county government. A site on Chester Avenue near the Kern River, which the county already owned, was selected. The location was chosen, in part, for two primary reasons: Chester Avenue was the route for U.S. Route 99 (Golden State Highway), the main highway connecting northern and southern California, and the site was adjacent to the Kern County Fairgrounds.

The building was designed by Charles H. Biggar in 1927 and completed in 1928, but the official opening was not until September 29, 1929.

In 1945, the Kern County Museum opened. It utilized a small portion of the Chamber of Commerce building. The museum became very popular, and the amount of artifacts on display continued to increase. By 1952, the museum was large enough that the Chamber of Commerce would move out of the building to a location in downtown. The museum would occupy the rest of the space. The structure was also converted to the museum's needs. This included covering the windows into the main hall, and covering the "Kern County Chamber of Commerce" entrance signs with "Kern County Museum" and the construction of a mezzanine.

In 2010, the building would undergo a major restoration effort. The goal was to restore the building to its original condition in 1928. The mezzanine was removed and the underlying paint was used to match the original color. The fluorescent lighting was replaced with chandeliers. The windows were reopened and museum sign was removed. In addition, the building exterior would return to the original multicolor paint scheme (at some point the build was painted completely white). The exhibits inside were removed and relocated to other parts of the museum. The hall is now rented for events.

References

Kern County Chamber of Commerce Building Wikipedia