Suvarna Garge (Editor)

Jonker JS 1 Revelation

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Top speed
  
290 km/h

Length
  
7.17 m

First flight
  
December 12, 2006

Wingspan
  
18 m

Manufacturer
  
Jonker Sailplanes

Jonker JS-1 Revelation wwwsebastiankawaplwpcontentuploads201103DB

The Jonker JS-1 Revelation is a glider built of glass-fibre, carbon fibre and Kevlar. It is available with an 18-metre span for the 18 metre class or a 21-metre span for the Open class. The manufacturer is Jonker Sailplanes of Potchefstroom South Africa, founded in 2004 by two brothers, Attie and Uys Jonker. The structural and chief designer is Attie Jonker, while the airfoil and main aerodynamic features were developed by Johan Bosman in co-operation with the Delft University of Technology.

Contents

18 metre versions

The wing has full-span flaperons, an elliptical planform and uses winglets. It is in 4 pieces, each tip is 1.5 metres. Two novel features are:

  • a double-hole blowing/suction system in the wings to minimise drag. The two rows of blow holes on the lower surface prevent turbulent flow at specific locations for different flap settings, thus reducing drag
  • a jet engine for the self-sustaining version. A self-launching version was considered but it was decided that the fuselage would require extensive structural modification.

    • The first flight of the JS-1 was on 12 December 2006. Series production then started and up to July 2012 about 34 had been produced Although it has been built to EASA standards, discussions on EASA certification are still continuing (as at July 2012).

    Attie Jonker won the 18 metre class South African National Championship in 2008 with a JS-1 Revelation.

    21 metre version

    A new version, JS1C-21m, with 3 metre wing-tips, which increase the span to 21 metres, has been developed. The first flight was on 22 March 2012. Because of the higher wing loads and increased maximum take-off mass of 720 kg (increased from 600 kg), the wing/wingtip junction has been redesigned including stronger wing spar caps and thicker wing-tip spars. All future JS1 Revelations will be compatible with the optional 21m wing-tips.

    The new wing-tips have water tanks each with a capacity of 17 litres of ballast which can be jettisoned separately from the main wing and fin tanks.

    Theoretical performance gives a claimed best glide of around 1:60, and with the maximum wing loading of 58.7 kg/m2 and the polar remaining flat at high cruise speeds. The manufacturers state that it is competitive at the highest level with other Open Class gliders. The results (2nd, 3rd and three other places in the top ten in the 2014 World Gliding Championships Open Class) supports this assertion.

    Variants

    JS-1
    18 meter wingspan prototypes
    JS-1B
    18 meter wingspan 18 metre class competition glider, production version.
    JS-1C
    21 meter wingspan Open class competition glider

    Specifications (JS-1B)

    General characteristics

  • Crew: One
  • Length: 7.17 m (23 ft 6 in)
  • Wingspan: 18 m (59 ft 1 in)
  • Aspect ratio: 28.8
  • Airfoil: JS-02-127 T12 with 6 variations along wing
  • Empty weight: 280 kg (617 lb)
  • Gross weight: 600 kg (1,323 lb)
  • Water ballast: 200 kg (441 lb)

    • Performance

  • Maximum speed: 290 km/h (180 mph; 157 kn)
  • Stall speed: 75 km/h (47 mph; 40 kn)
  • Rate of sink: 0.50 m/s (98 ft/min)
  • Lift-to-drag: 53
  • Wing loading: 31.2 kg/m2 (6.4 lb/sq ft) - 53.6 kg/m² (10.9 lb/sqft)

    • References

    Jonker JS-1 Revelation Wikipedia
    (Text) CC BY-SA