Supriya Ghosh (Editor)

Intel Edison

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Developer
  
Intel Corporation

Release date
  
Q3'14

Storage
  
4 GB EMMC

Type
  
Tiny Board Computer

Memory
  
(LPDDR3 1 GB)

Intel Edison

CPU
  
Atom 2-Core (Silvermont) @ 500 MHz

The Intel Edison is a computer-on-module offered by Intel as a development system for wearable devices and Internet of Things devices. The system was initially announced to be the same size and shape as an SD card and containing a dual-core Intel Quark x86 CPU at 400 MHz communicating via Bluetooth and Wi-Fi. A later announcement changed the CPU to a 22 nm Silvermont dual-core Intel Atom CPU, and in September 2014 a second version of Edison was shown at IDF, which was bigger and thicker than a standard SD card.

Contents

First version

Its launch was announced at CES in January 2014. Intel CEO Brian Krzanich showed a demo of a baby monitoring system (Nursery2.0) which was created using Intel Edison. He also announced that the Wolfram Language and Mathematica will be available on the Intel Edison and that the device will be able to run Linux.

Second version

In March 2014, Intel announced changes in the Intel Edison project and the second version of the board was presented in September 2014. Its dimensions are 35.5 x 25 x 3.9 mm, with components on both sides. The board's main SoC is a 22 nm Intel Atom "Tangier" (Z34XX) that includes two Atom Silvermont cores running at 500 MHz and one Intel Quark core at 100 MHz (for executing RTOS ViperOS). The SoC has 1 GB RAM integrated on package. There is also 4 GB eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers. The board has 70-pin dense connector (Hirose DF40) with USB, SD, UARTs, GPIOs. The price of the device is around 50 USD. It runs Yocto Linux with development support for Arduino IDE, Eclipse (C, C++, Python), and Intel XDK (NodeJS, HTML5).

Interface connector

The connector on Intel Edison is a Hirose 70-pin DF40 Series “header” connector. (Hirose part number: DF40C-70DP-0.4V(51)). It exports many signals (USB, GPIOs, SPI, I2c, PWM, etc.).

The mating Hirose connector on an expansion board is the “receptacle” connector and is available in three different heights (1.5 mm, 2.0 mm, 3.0 mm).

Arduino board

Intel Released an Arduino Uno compatible board (with only 4 PWM pins instead of 6) that accepts the Intel Edison module. Now it has 6 PWM pins

Board I/O Features:

  • 20 digital input/output pins, including 6 pins as PWM outputs.
  • 6 analog inputs.
  • 1 UART (Rx/Tx).
  • 1 I2C.
  • 1 ICSP (In-system programming ) 6-pin header (SPI).
  • Micro USB device connector OR (via mechanical switch) dedicated standard size USB host Type-A connector.
  • Micro USB device (connected to UART).
  • SD card connector.
  • DC power jack (7 to 15VDC input).
  • Intel breakout board

    Intel released a breakout board that is twice the area of the Intel Edison module and is designed for prototyping with open source hardware and software.

  • Exposes native 1.8V I/O of the Edison module
  • 0.1” grid I/O array of through-hole solder points
  • USB OTG with USB Micro Type-AB connector
  • USB OTG power switch
  • Battery Charger
  • USB to device UART bridge with USB Micro
  • Type-B connector
  • DC power supply jack (7V – 15V) DC input
  • The table below lists the signals from the Edison Module that are routed to the four breakout connector (J17-J20). The figure below shows the location of each connector.

    Modulowo board

    In October 2015, Modulowo published information about the development kit Modulowo Explore E for Intel Edison. Development Board allows for quick prototyping and design new solutions and adding sensors, controllers lights, motor drivers, GPS modules, communication modules and more.

    References

    Intel Edison Wikipedia


    Similar Topics