Neha Patil (Editor)

IT Grade

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit

IT Grade refers to the International Tolerance Grade of an industrial process defined in ISO 286. This grade identifies what tolerances a given process can produce for a given dimension.

Contents

The specific tolerance for a particular IT grade is calculated via the following formula:

T = 10 0.2 × ( I T G − 1 ) ⋅ ( 0.45 × D 3 + 0.001 × D )

where:

  • T is the tolerance in micrometres [µm]
  • D is the geometric mean dimension in millimeters [mm]
  • ITG is the IT Grade, a positive integer.

    • One thinks of D as being the key dimension on the part and T as being the required tolerance on that key dimension. The larger the ITG, the looser the tolerance.

    Meaning and interpretation

    An industrial process has an IT Grade associated with it, indicating how precise it is. When designing a part, an engineer will typically determine a key dimension (D) and some tolerance (T) on that dimension. Using this formula, the engineer can determine what IT Grade is necessary to produce the part with those specifications. Thus, if injection molding has an IT Grade of 13 and a part needs an IT Grade of 5, one cannot injection mold that part to those specifications. It is useful in determining the processes capable of producing parts to the needed specification.

    Alternate formulation

    In "Manufacturing Processes II" (Tata McGraw-Hill Education) by H S Bawa, the following equation is given on page 95 for sizes over 500 mm:

    I = 0.004 ⋅ D + 2.1 T = k ⋅ I

    References

    IT Grade Wikipedia
    (Text) CC BY-SA