Manufacturer Honda Motor Company Production 1984–1996 Class Moped | Also called Scoopy
City Express Assembly Barcelona, Spain | |
 | ||
Engine 49 cc (3.0 cu in), air-cooled, two stroke, single | ||
The Honda SH50 is a 49 cc (3.0 cu in), air-cooled, two stroke, single cylinder, scooter style, restricted moped manufactured by the Honda Motor Company between 1984 and 2006, with substantial revisions for the 1996 model year. It was equipped with continuously variable automatic transmission, (Honda V-Matic transmission) together with both electric and kick start, automatic choke and capacitor discharge electronic ignition. Brakes were drum front and rear, (disc front on later models) operated pedal-cycle style by two handlebar levers. The early models had some resemblance to Honda's C50/70/90 Super Cub range with a similar shape, dual seat and rear carrier, but with a scooter type floor, unlike the P series of mopeds such as the Honda PC50 or the Honda Express N series, which had cycle style construction. The SH50 was also known as the City Express and in some markets, as the Scoopy. All models had cycle type wheels as against the smaller wheels of later 50cc scooter style mopeds. The battery, fuel tank and two-stroke-oil reservoir were contained under the seat. Electrics were 12 volt and a handlebar mounted binnacle, which effectively formed part of the front bodywork, contained basic instrumentation and warning lights.
Contents
SH50–E
The first version of the SH50 carried an "E" suffix, and was imported into the UK from March 1984 to September 1986. It was made in Honda Benelux's plant at Aalst, Belgium and was available in either red or white with the floor panels painted in the same colour. This model differed from the later "H" and "K" designations in that the length, width and height were 1.800 m (70.9 in), .694 m (27.3 in) and 1.05 m (41 in), respectively. It was also slightly lighter at 68 kg (150 lb)
SH50–H
The "H" suffixed version replaced the "E" model from 1986. There were minor changes to the dimensions as it was slightly longer, narrower and lower. The drive train, power output and other mechanicals, remained the same as the earlier model. It was available in blue or red, with slightly different graphics and the floor panels were now painted grey. This model was manufactured at Honda's factory at Barcelona, Spain.
SH50–K/P/D/DP
The "K" suffixed model went into production in 1989. Apart from different graphics it was identical to the "H" type that it replaced. It was later superseded by "P", "D" and "DP" models which had only minor cosmetic changes and cast three-spoke wheels.
Later model (1996-2003)
In 1996, the SH50 underwent a number of revisions. The bodywork was restyled to give a less angular look, incorporating a raised pillion seat. The front brake became disc operated, the wheels were now of a cast asymmetrical type instead of spokes and there was under-seat storage as well as a lockable compartment on the inside of the front fairing. This version was manufactured in Spain, Italy and Japan and was approximately the same size as the earlier ones, but was slightly heavier and had a larger fuel tank.