Manufacturer Honda Production 1988–1991 Transmission 5 speed manual | Also called Hawk GT, Bros, RC31 Class naked bike | |
 | ||
Engine 647cc Four-stroke V-Twin | ||
The Honda Hawk GT NT650 motorcycle was designated as model RC31 and was designed by Toshiaki Kishi, and was the second Honda with "Pro-Arm" suspension bike after the RC30 VFR750R. The RC model designation is for bikes up to 750 cc, though the Honda Pacific Coast (PC800) has an engine of more than 750 cc and a model designation of RC34.
Contents
The Hawk GT was one of the first modern naked bikes along with the Yamaha SRX, which were both released several years before the Ducati Monster and eventually the Suzuki SV650. The Hawk GT is often described as a cult bike.
North American model
The US model NT650, Hawk GT 647, RC31 was introduced in 1988 and produced through 1991. It has an aluminium box frame with the separate rear frame bolted on, and a unique, single-sided swing arm.
Priced above other entry-level models and only slightly below many 600cc sport bikes, the Hawk GT did not sell well in American markets.
There are only very minor changes between the 1988 model year and the 1989-1991 model years. In 1989, the front suspension damper rods were changed to have only two (rather than four for the 1988) holes. The front brake calipers were also changed to have screw-on covers over the mounting pins. In 1991, the oil lines were run internally through the engine, rather than externally and only a handful of 1991 model year bikes actually made it into the United States, making the 1991 the rarest vintage Hawk in America. The Canadian model was identical to the US model except for the colors.
The 1988 model had a wet weight of 412 lb (187 kg). The 650 cc engine had an output of 58 hp (43 kW) @ 5000 rpm.
European model
A cousin to the Hawk GT, the NTV 600 'Revere' was available in Europe from 1988. It had an integrated steel frame, larger fuel tank (19 litres or 4.2 imperial gallons), a lower and stubbier silencer, shaft drive, single-sided alloy swinging arm at rear with adjustable monoshock and a centre stand. It was seen as expensive for what was on offer.
The 600 Revere was replaced in 1993 by the bored-out NTV650, with a cheaper specification (tubular handlebars instead of alloy bars), and continued with the 'stubby' silencer. The price was reduced compared with the Revere, and this later model sold better.
The NTV650 was replaced in 1998 by the Spanish built NT650V Deauville, a heavier, higher geared, fully faired model with integral panniers and a steel double sided swinging arm.
Japan model
Named the Bros in Japan, (The Model name Bros being derived from Brothers in reference to the 400cc and 650cc versions which were conceived together as brothers), the NT came in 400 and 650 cc (24 and 40 cu in) versions. After Honda stopped exporting the Hawk in 1992, they continued the Bros in Japan for one more year. A close ratio gear box (which drops into the Hawk) different wheels, and lower clip-ons were the major changes. A Motor Cycle News review said the Bros 400 is "heavy, underpowered and outdated, ... but surprisingly nice to ride – they’re well balanced, steer well and the engine is flexible, torquey and characterful given its 33bhp output. The Bros has a comfy, semi-upright café racer riding position."