Power type Diesel-electric Build date 1989 – 1994 | Model C40-8W AAR wheel arr. C-C | |
 | ||
Builder GE Transportation Systems Gauge 4 ft 8 ⁄2 in (1,435 mm) standard gauge | ||
The GE C40-8W is a 6-axle diesel-electric locomotive built by GE Transportation Systems from 1990 to 1994. It is part of the GE Dash 8 Series of freight locomotives.
Contents
This locomotive model is often referred to as a Dash 8-40CW, and is distinguished from the Dash 8-40C by the addition of a "wide" or "safety" cab.
A cowl-bodied version of this locomotive, built only for the Canadian market, was the GE Dash 8-40CM.
History
The first Dash 8-40CW was delivered to the Union Pacific railroad in 1990. In total, GE would build 756 Dash 8-40CWs. The Dash 8-40CW was succeeded by the Dash 9-44CW in 1994.
Like most GE locomotives, the Dash 8-40CW saw continuous upgrades over the course of its production. Later model Conrail units were built with split cooling systems for the turbocharger intercooler and engine cooling (previous Dash 8 series had both on the same cooling system). The later units delivered to Conrail in 1993 and 1994 were equipped with GE's Integrated Function Displays (IFD). The IFDs are LCD displays that provide the engineer with the same information previously provided by analog gauges, as well as integrating distance counter and End of Train Device telemetry functions.
Technical
The Dash 8-40CW is powered by a 4,000-horsepower (3,000 kW) V16 7FDL diesel engine driving a GE GMG187 main alternator. The power generated by the main alternator drives six GE 752AG or 752AH Direct Current traction motors, each with a gear ratio of 83:20 and connected to 40-inch (1,016 mm) wheels which allow the Dash 8-40CW a maximum speed of 70 mph (110 km/h).
Depending on customer options, the Dash 8-40CW carries approximately 5000 US gallons (18927 L) of diesel fuel, 410 US gal (1,552 L) of lubricating oil, and 380 gallons (1,438 L) of coolant. Like most North American diesel locomotives, the Dash 8-40CW uses normal water for cooling. The Dash 8-40CW has a maximum tractive effort of 108,600 lbf (483,000 N) at 11 mph (18 km/h) with the 83:20 gearing. Overall dimensions for the Dash 8-40CW are 70 ft 8 in (21.54 m) in length, 15 ft 4 in (4.67 m) in height and 10 ft 2 in (3.10 m) in width.
Rebuilds
The General Electric Dash 8-41CW or Dash 8-41W (C41-8W) is a variation with the same 16-cylinder engine upgraded to 4,135 hp (3,083 kW). 154 were produced between 1993 and 1994 for both the Union Pacific and Santa Fe (ATSF) railroads, and some Dash 8-40CW units were also uprated to Dash 8-41CW standard by the railroads. Since no four-axle versions of this unit were built, the "C" designation (indicating trucks with three powered axles, or C-C) is often omitted.
The GE Dash 8.5-40CW is 6-axle a 4,000 hp (2,800 kW) diesel-electric locomotive rebuilt by Norfolk Southern. The first locomotive started its rebuild in 2012. Only one is on the active roster, and it is stored. The units will be rebuilt with the Norfolk Southern-designed wide-nose RLS cab which meets current FRA crashworthiness standards. The rebuild will also include the installation of locomotive speed limiter (LSL), and cab signals and other electronics upgrades. The project appears to be cancelled in April 2016 due to repeated failures.