Fremantle railway line

History

The line opened on 1 March 1881 as the first suburban railway line in Perth by William C. F. Robinson. It originally operated as the Eastern Railway and ran between Fremantle and Guildford, via central Perth. In March 1884, the line was extended via Midland Junction to Bellevue and later to Clackline, York and Northam. The line opened as a single track with a passing loop at Claremont, it was duplicated in 1896/97. A dedicated freight line was later added on the western side between Cottesloe and the Leighton Marshalling Yard.

On 22 October 1898, the line was extended south to Robbs Jetty, on 1 July 1903 via Cockburn to Coogee and on 19 December 1955 via Woodman Point to Kwinana The Coogee to Woodman Point section closed on 16 September 1973, followed by Robbs Jetty to Coogee in February 1986.

In July 1926, the Fremantle Railway Bridge over the Swan River was partly washed away in a flood, with one line restored in October 1926 and the second in April 1928.

In the 1960s, as part of the standard gauge project, the section south of Cockburn was replaced by the Kwinana line on a different alignment. One of the lines north of Cockburn to the container terminal at North Quay and Leighton Marshalling Yard was converted to standard gauge. The Fremantle Railway Bridge was converted to dual gauge. A marshalling yard was built at Robbs Jetty.

In 1966, the eastern railway metropolitan passenger services were curtailed to terminate at Midland.

Passenger services on the Fremantle line were suspended on 1 September 1979. The decision was based on three one day counts in 1971, 1975 and 1977. Despite a petition signed by 110,000 people the government was not persuaded to change its mind. The service was reinstated on 29 July 1983 following a change of government.

For the staging of the 1987 America's Cup, stations south of Fremantle were erected for use by special trains at The Esplanade, Success Harbour and South Beach. The Hotham Valley Railway operated a daily service on this section of the line with a W class steam locomotive as the Spinnaker Run between October 1986 and February 1987. None have been used since. The narrow and standard gauge lines were rebuilt as a single dual gauge line at the same time.

During 1990, work commenced on building a new North Fremantle station, 800 metres north of its original location, which opened for service on 28 July 1991. Leighton station, which was 700 metres further north, was demolished during the electrification of the line. Regular electric services started in September 1991. Today there are 17 stations on the line.

As part of the Subi Centro project, 900 metres of the line and Subiaco station were sunk in 1998. Between 2011 and 2014, the Fremantle line was sunk between Lake Street and the Horseshoe Bridge in the Perth CBD to allow for the redevelopment of the area. Perth station's former Fremantle to Midland platform became an island platform, with an additional platform and track built on the north side. Platforms west of the Horseshoe Bridge were demolished. In June 2011 a $237 million cost blow-out was revealed, added to a 2009 project estimate of $500 million.

The new tunnel is the first in Western Australia to use a rigid overhead conductor rail instead of overhead wires, the same system as used on the Madrid Metro. With overhead wires, the clearance between the new tunnel and the existing Joondalup line tunnel is only 75 cm. By using a conductor rail, the new tunnel could be built to a smaller diameter, allowing for an increased clearance between the two. The new tunnel opened on 18 July 2013.

With the privatisation of Westrail in 2000, responsibility for the Perth to South Beach section has passed to the Public Transport Authority and the South Beach to Cockburn Junction section to Brookfield Rail, although operational responsibility for the standard gauge line is with Brookfield.

Services

Transperth operate services on the line from Fremantle through the Perth CBD to Midland on the Midland line. Freight services operate from Kewdale and Forrestfield to North Quay. Until July 2015 these were operated by Aurizon when SCT Logistics took over.

Rolling stock

Until the ADG class railcars entered service in 1953, services on the Fremantle line were operated by steam locomotives. Some peak-hour services continued to be steam hauled until the arrival of the ADK/ADB class diesel multiple units in 1968 resulted in the end of steam haulage. When the line was electrified in 1991, A-series electric multiple units took over.

Patronage

Below is the annual patronage of Fremantle railway line from 2010–2011 financial year. Figures are provided as total boardings, which includes all fare-paying boardings and free travel on stations within the free transit zones as well as transfers between stations. The figures for rail replacement and special events services are not included in the total.

In popular culture

The Fremantle line featured in the 2006 film Last Train to Freo.

Stations

During peak periods, trains omit some stops.

Old stopping patterns

School special services