Kalpana Kalpana (Editor)

Formula Car Challenge

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Category
  
Open Wheel Racing

Inaugural season
  
2005

Tyre suppliers
  
Goodyear

Country
  
United States

Engine suppliers
  
Mazda

Formula Car Challenge

Constructors
  
World Speed Inc. (FS2.0) Moses Smith Racing (FM) Star Race Cars (PFM)

The Formula Car Challenge presented by Goodyear is a National Auto Sport Association-affiliated car racing series, operating in four different regions across the United States: West Coast, South West, East Coast and Mid West. There is also an annual championship involving all four regions. While each region varies in terms of events, the series itself has three classes of competition, all powered by Mazda, with Goodyear Racing tires: Formula Mazda (FM), Pro Formula Mazda (PFM), and the FormulaSPEED2.0 (FS2.0).

Contents

The Formula Car Challenge was started in 2005 to allow for a high level of competition in a quality environment without "pro racing budgets." By 2009 there were four regions in place in key markets of the United States. Goodyear presenting sponsorship was secured in 2010, as was a National Auto Sport Association sanctioned national championship. Mazdaspeed Contingency Awards associated with the Formula Car Challenge National title have included close to $30,000 in cash, and eligibility for the MAZDASPEED Career Advancement Award.

Formula Mazda

Formula Mazda cars are built to spec entirely by Moses Smith Racing except for the motor provided by Daryl Drummond Enterprises. A steel space frame with a 95-inch wheelbase is used. Power is provided by a sealed 1.3 litres (79 cu in) Mazda 13B rotary engine producing 180 horsepower (130 kW) connected to a five-speed racing transmission. All parts must be as provided by the official manufacturer, though certain aspects may be adjusted within regulations so as to accommodate the various tracks used.

Permitted adjustments

  • Shock absorbers
  • Sway bars
  • Brake bias
  • Wing angles
  • Gear ratios
  • Tire pressure
  • FormulaSPEED

    The FormulaSPEED car is built on a chassis manufactured by Fast Forward Racing Components and constructed out of 4130 Chrome Moly Alloy steel tubing. The firewall, undertray, and side panels are bonded and riveted aluminum. Fiberglass is used for the bodywork, with 4-layer Kevlar for side protection and composite structure for front crash protection. Suspension is double-wishbone with dampers and springs provided by Öhlins and uprights of billet aluminum alloy 7075. Power is produced by a 2 litres (120 cu in) liter Mazdaspeed MZR with VVT which produces 200 horsepower (150 kW) horsepower. Engine mapping is by Hasselgren Engineering, controlled by an SQ6 ECU by Cosworth/Pectel, fueled by an FIA certified fuel cell. Power is transmitted to the wheels through a Hewland FTR six-speed sequential transaxle, and tires are Goodyear Formula Eagle G19 with 13" diameter. The brakes are floating rotors and aluminum calipers provided by Wilwood, with brake bias adjustable from the cockpit.

    References

    Formula Car Challenge Wikipedia