Used by See Users Produced 2006–present | Place of origin BelgiumUnited States Manufacturer FNH USA | |
 | ||
Variants See Variants:FNP-9 (9×19mm Parabellum)FNP-9M (9×19mm Parabellum)FNP-40 (.40 S&W)FNP-45 (.45 ACP)FNP-357 (.357 SIG) | ||
The FN FNP pistol is a series of semi-automatic, polymer-framed pistols manufactured in Columbia, SC, by FNH USA, a division of Fabrique Nationale de Herstal. The pistol debuted in early 2006 and is chambered for the 9×19mm Parabellum, .40 S&W, .45 ACP, and .357 SIG cartridges.
Contents
Standard features
All variations of the pistol include ambidextrous decocking levers and a reversible magazine release, as well as an integrated tactical accessory rail. In addition, the FNP-45 offers an ambidextrous slide release.
According to FNH USA, the FNP line of pistols is the only polymer-framed autoloading pistol on the market (as of its introduction) with fully replaceable frame rails; this allows the pistol to be rebuilt after extensive firing, thereby extending service life. (Steyr M Series pistols also have this feature, and were released in 1999.)
Design and operation
The FNP series weapons are hammer fired weapons utilizing a Browning cam system with an external extractor. The trigger module is housed inside the polymer frame as an individual unit connected to the hammer. The magazine release button is held in place by a retention pin which can be removed to allow the magazine release button to be reversed. The trigger pull for the FNP-9 variant is generally 8 pounds while in double action and 3–4 pounds while in single action. While the lower frame is made of high-strength polymer, the slide is made of stainless steel.
Disassembly and reassembly of the handgun is relatively simple. To disassemble the weapon, the slide is locked to the rear and the magazine is released from the weapon. The takedown lever located to the front of the frame is rotated downwards and the slide is released to allow it to slip off the frame rails. Once removed, the recoil spring is removed from its position in the barrel and the barrel is removed. To reassemble the weapon the process is reversed with the slide being slid onto the frame rails and the takedown lever rotated up while the slide is locked to the rear.
Variants
The FNP Series pistol is produced in five basic models with several different variations on each model. Each of the five models, the FNP-45, the FNP-40, the FNP-357, the FNP-9 and the FNP-9M (discontinued), are offered with the following features:
The FNP-9 and FNP-40 have also been marketed as the Browning Pro-9 and Pro-40.