Manufacturer Express Aircraft Company | ||
The Express Series 90 is an American homebuilt aircraft that was designed and produced by the Express Aircraft Company of Olympia, Washington, introduced in the late 1980s. When it was available the aircraft was supplied as a kit for amateur construction.
Contents
Design and development
The Express Series 90 is a development of the earlier Wheeler Express. It incorporates a 20% larger tail which gives a wider center of gravity range. The larger tail also enhances pitch and yaw stability.
The aircraft features a cantilever low-wing, a four seat enclosed cabin, fixed tricycle landing gear with wheel pants and a single engine in tractor configuration.
The Series 90 is made from composites. Its 31.00 ft (9.4 m) span wing mounts flaps and has a wing area of 130.00 sq ft (12.077 m2). The cabin width is 46 in (120 cm). The standard engine used is the 300 hp (224 kW) Lycoming IO-540 four stroke, air-cooled, six cylinder powerplant.
The aircraft has a typical empty weight of 1,840 lb (830 kg) and a gross weight of 3,200 lb (1,500 kg), giving a useful load of 1,360 lb (620 kg). With full fuel of 92 U.S. gallons (350 L; 77 imp gal) the payload for pilot, passengers and baggage is 808 lb (367 kg).
The manufacturer estimated the construction time from the supplied kit as 2000 hours.
Operational history
In December 2013 three examples were registered in the United States with the Federal Aviation Administration.
Specifications (Series 90)
Data from AeroCrafter
General characteristics
Performance