In the eurocode series of European standards (EN) related to construction, Eurocode 5: Design of timber structures (abbreviated EN 1995 or, informally, EC 5) describes how to design buildings and civil engineering works in timber, using the limit state design philosophy. It was approved by the European Committee for Standardization (CEN) on 16 April 2004. It applies for civil engineering works from solid timber, sawn, planned or in pole form, glued laminated timber or wood-based structural products, (e.g. LVL) or wood-based panels jointed together with adhesives or mechanical fasteners and is divided into the following parts.
Contents
- Part 1 1 General Common rules and rules for buildings
- Part 1 2 General Structural fire design
- Part 2 Bridges
- References
EN Eurocode 5 is intended to be used in conjunction with:
Part 1-1: General — Common rules and rules for buildings
EN 1995-1-1 gives general design rules for timber structures together with specific design rules for buildings.
Contents
Part 1-2: General - Structural fire design
EN 1995-1-2 deals with the design of timber structures for the accidental situation of fire exposure and is intended to be used in conjunction with EN 1995-1-1 and EN 1991-1-2:2002. EN 1995-1-2 only identifies differences from, or supplements normal temperature design and deals only with passive methods of fire protection. Active methods are not covered.
Part 2: Bridges
EN 1995-2 gives general design rules for the structural parts of bridges, i.e. structural members of importance for the reliability of the whole bridge or major parts of it, made of timber or other wood-based materials, either singly or compositely with concrete, steel or other materials.