Douglas DT

The Douglas DT bomber was the Douglas Aircraft Company's first military contract, forging a link between the company and the United States Navy. Navy Contract No. 53305 of April 1, 1921, required only 18 pages to set out the specifications that resulted in the purchase of three DT (D for Douglas, T for torpedo) folding-wing aircraft.

Contents

• Aeromarine 39 b airplane crashes while landing on uss langley douglas dt 2 seapl hd stock footage
• Us douglas dt seaplane catapults from uss langley while its is underway in the pa hd stock footage
• Variants
• Operators
• Specifications DT 2 floatplane
• References

The DT used a welded steel fuselage with aluminum covering the forward and center sections and fabric covering the rear section. Douglas built 46 DT-1 and DT-2 torpedo bombers for the U.S. Navy, Norwegian Navy, and Peruvian Navy. 20 DT-2 aircraft were built under license by the Lowe, Willard & Fowler Engineering Company (LWF), six by the Naval Aircraft Factory (NAF), and 11 by the Dayton-Wright Company. Another seven were built for Norway under license by Marinens Flyvebåtfabrik. Although still in service when the Germans invaded Norway, the Norwegian DTs did not see action in the Norwegian Campaign. The DT could be fitted either with pontoons or wheeled landing gear and could carry a 1,800 lb (816 kg) torpedo.

The first flight was in November 1921 and production continued until 1929. The DT operated off the U.S. Navy's first aircraft carrier, the USS Langley, from land bases, and from seaplane tenders. Several were flown by the Marine Corps.

Variations of the DT-2 aircraft were designated DT-4, DT-5, DT-6, and DTB. Machines licence-built by Dayton-Wright were internally designated SDW by that company. The type became the basis for the Douglas World Cruiser.