OS grid reference SH5177350251 | ||
![]() | ||
Address Nantlle Rd, Talysarn, Caernarfon LL54 6AE, UK Hours Open today · Open 24 hoursFridayOpen 24 hoursSaturdayOpen 24 hoursSundayOpen 24 hoursMondayOpen 24 hoursTuesdayOpen 24 hoursWednesdayOpen 24 hoursThursdayOpen 24 hours |
104m dive dorothea quarry
Dorothea Quarry is a large slate quarry in the Nantlle Valley in North Wales.
Contents
- 104m dive dorothea quarry
- Bottom of dorothea quarry 106m dive
- HistoryEdit
- DescriptionEdit
- TransportationEdit
- LocomotivesEdit
- References
Bottom of dorothea quarry 106m dive
HistoryEdit
Dorothea Quarry commenced working in the early 1820s, though there were a number of smaller workings on or near the site before this. By 1848 it had become the dominant quarry in the area, employing 200 men and producing 5000 tons of finished slate. Production peaked in 1872 at 17442 tons. In the 1930s over 350 men were employed at Dorothea. Production dropped significantly after the start of World War II and the quarry closed in 1970.
Since quarrying ended in 1970, the Dorothea Quarry has flooded and become a popular site for scuba diving (even though there are no facilities provided, and diving is officially banned in the quarry); the unregulated nature and depth of the site has encouraged some divers to overestimate their capabilities – in the decade 1994-2004 21 divers lost their lives in the quarry.
DescriptionEdit
The quarry sits at the bottom of the wide Nantlle valley and consists of six pits, the deepest dropping 106m from the surface. The slate veins here run vertically, allowing unusually deep vertical pits to be dug. Because the pits fall below the water table they needed to be constantly pumped to stay dry. A Cornish Beam Engine was installed in 1904 to pump the pits; it stayed in use until 1951 when it was replaced with electric pumps.
TransportationEdit
The quarry was one of the first users of the 3 ft 6 in (1,067 mm) Nantlle Railway in 1828. It later developed an extensive internal tramway system of 2 ft (610 mm) gauge. Dorothea was one of the first users of De Winton locomotives in 1869.
LocomotivesEdit
2 ft (610 mm) gauge locomotives known to have worked at Dorothea.