Samiksha Jaiswal (Editor)

Dodge M37

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
⁄4-ton 4x4 truck

Manufacturer
  
Dodge

No. built
  
115,838

Place of origin
  
United States

Produced
  
1951-1968

Dodge M37

Weight
  
5,917 lb (2,684 kg) (empty)

The Dodge M37  3⁄4-ton 4x4 truck (G741) was Dodge's follow-up to their sucessfull WC Series from WWII. Introduced in 1951 it was used extensively by the United States armed forces during the Korean war. During the 1970s they were replaced by the commercial truck based  1 1⁄4-ton M715 and M880 series.

Contents

History

Six prototypes of the vehicle were produced in early-to-mid 1950 based on the WC series Dodge vehicles used in World War II, with the first pre-production pilot vehicle rolling off the assembly line on 14 December 1950. Many of the components on the M37 are similar or identical to the World War II vehicle and many deficiencies of the previous series were corrected in the M37. Notably, a conventional pickup truck style bed replaced the platform on the World War II vehicle, simplifying production. There was significant drivetrain and powerplant commonality with the WDX series civilian Power Wagons. Outside of the fenders, there were sheet metal differences between all the vehicles.

Production of the M37 began in earnest in January 1951, with approximately 11,000 vehicles made by the end of that year. By mid-1954 63,000 of the vehicles had been produced. In 1958 a number of modifications to the design resulted in the new vehicles being designated as M37B1. From mid-1958 until the end of production 47,600 M37B1 vehicles were produced. Approximately 4,500 Canadian M37CDNs were also produced between 1951 and 1955. These vehicles continued in service worldwide in the Israeli and Greek militaries.

In total, between 1951 and 1968, 115,000 M37s were produced. It was common in the 1970 and 1980s to encounter these vehicles in government auctions. Many of the vehicles were transferred to civilian agencies and some are still in use today in rural areas. They were out of significant military service by the late 1970s, replaced by the M715 and M880 series of military trucks.

Variants

  • M42 command truck
  • V-41 telephone maintenance vehicle, also M201
  • M43 ambulance
  • M56 tool truck, has a bumper-mounted winch
  • M152 enclosed utility truck, Canadian variant
  • R2 air field fire engine
  • V-126 truck, for AN/MPX-7 radar
  • M283 Long Wheel Base (LWB) Cargo Truck
  • MB2 Fire and Rescue Truck (M56 with Gichner body)
  • M506 truck, hydrogen peroxide servicer, PGM-11 Redstone

    • Engine

    The powerplant was identical to the World War II era WC vehicles line, as was most of the drivetrain. The straight-six cylinder engine was derived from a 1930s era passenger vehicle engine that was widely produced. This was in line with a long-standing military procurement strategy that attempted to use commercially produced vehicle variants in military service.

    Many deficiencies with aging design became apparent in the 1960s, including a tendency of the connecting rods to fail at high rpms due to the long cylinder stroke of the engine. As the average speed of the vehicles in the military increased, these engine failures became commonplace due to the low gear ratio of the vehicle, which was originally designed as a multipurpose vehicle capable of transporting heavy loads of ammunition.

  • Model: T245 Dodge
  • Type: "L" Head, 6 cylinder
  • Power: 78 bhp (58.2 kW) at 3200 rpm
  • Displacement: 230 cubic inches (3.8 L) (Canadian version used the larger 250.6 cu in (4.1 L) engine)
  • Bore: 3 1⁄4 in (82.6 mm), Stroke: 4 5⁄8 in (117 mm)
  • Oil capacity: 6 U.S. quarts (5.7 l)
  • Radiator capacity: 25 U.S. quarts (24 l)
  • Carter carburetor Model ETW-1 sidedraft

    • Driveline

    Clutch

  • Borg & Beck Model 11828 10 in (250 mm) single plate dry disc (Borg & Beck 11 inch clutch on Canadian version.)

    • Transmission

  • New Process Model 88950 (or NP420)(Acme Model T-98 on Canadian version)
  • 4-speed, Synchro-Shift in 3rd and 4th gear

    • Transfer Case

  • New Process 88845 (or NP200)
  • Ratio: High 1:1, low 1.96:1
  • Twin lever operation, one for 4×4 or 4×2 selection, one for hi or low range

    • Drive Shaft

  • MFG Universal Products

    • Axles

  • Dodge Full Floating (hypoid), ratio 5.83:1
  • Front Universal Drive New Process (Tracta joint)

    • Chassis

    Fuel tank

  • 24 U.S. gallons (91 L; 20 imp gal) tank (vented through engine air intake for fording purposes)

    • Electrical

  • Ignition, starting, lights, 24 volts

    • Brakes

  • Wagner hydraulic drum
  • Parking—external contracting band, 48 square inches (310 cm2)

    • Steering

  • Gemmer Model B-60, worm and sector type

    • Wheelbase

  • Cargo Model M37 and Command Model M42: 112 in (2.8 m)
  • Ambulance Model M43 and Tele. Maint. Model V41: 126 in (3.2 m)

    • Weight

  • M37 without winch: 5,687 lb (2,580 kg), M37 with winch 5,987 lb (2,716 kg)

    • Tire Size

  • 9.00 × 16 - 8 ply non-directional military

    • Winch

  • Braden LU-4, PTO operated, 7,500 lb (3,400 kg) capacity (250’ of 7/16" wire rope [75 m by 11 mm] – 10’ [3 m] chain with hook)

    • References

    Dodge M37 Wikipedia
    (Text) CC BY-SA