Girish Mahajan (Editor)

Decagon

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
Regular polygon

Schläfli symbol
  
{10}, t{5}

Dual polygon
  
Self

Edges and vertices
  
10

Internal angle (degrees)
  
144°

Decagon

Symmetry group
  
Dihedral (D10), order 2×10

In geometry, a decagon is a ten-sided polygon or 10-gon.

Contents

Regular decagon

A regular decagon has all sides of equal length and each internal angle will always be equal to 144°. Its Schläfli symbol is {10} and can also be constructed as a truncated pentagon, t{5}, a quasiregular decagon alternating two types of edges.

Area

The area of a regular decagon of side length a is given by:

A = 5 2 a 2 cot ( π 10 ) = 5 2 a 2 5 + 2 5 7.694208843 a 2


In terms of the apothem r (see also inscribed figure), the area is:

A = 10 tan ( π 10 ) r 2 = 5 r 2 5 2 5 3.249196963 r 2


In terms of the circumradius R, the area is:

A = 5 2 sin ( π 5 ) R 2 = 5 2 R 2 5 5 2 2.938926262 r 2


An alternative formula is A = 2.5 d a where d is the distance between parallel sides, or the height when the decagon stands on one side as base, or the diameter of the decagon's inscribed circle. By simple trigonometry,

d = 2 a ( cos 3 π 10 + cos π 10 ) ,

and it can be written algebraically as

d = a 5 + 2 5 .

Sides

The side of a regular decagon inscribed in a unit circle is 1 + 5 2 = 1 ϕ , where ϕ is the golden ratio, 1 + 5 2 .

Construction

As 10 = 2 × 5, a power of two times a Fermat prime, it follows that a regular decagon is constructible using compass and straightedge, or by an edge-bisection of a regular pentagon.

An alternative (but similar) method is as follows:

  1. Construct a pentagon in a circle by one of the methods shown in constructing a pentagon.
  2. Extend a line from each vertex of the pentagon through the center of the circle to the opposite side of that same circle. Where each line cuts the circle is a vertex of the decagon.
  3. The five corners of the pentagon constitute alternate corners of the decagon. Join these points to the adjacent new points to form the decagon.

The golden ratio in decagon

Both in the construction with given circumcircle as well as with given side length is the golden ratio dividing a line segment by exterior division the determining construction element.

  • In the construction with given circumcircle the circular arc around G with radius GE3 produces the segment AH, whose division corresponds to the golden ratio.
  • A M ¯ M H ¯ = A H ¯ A M ¯ = 1 + 5 2 = Φ 1.618 .
  • In the construction with given side length the circular arc around D with radius DA produces the segment E10F, whose division corresponds to the golden ratio.
  • E 1 E 10 ¯ E 1 F ¯ = E 10 F ¯ E 1 E 10 ¯ = R a = 1 + 5 2 = Φ 1.618 .

    Symmetry

    The regular decagon has Dih10 symmetry, order 20. There are 3 subgroup dihedral symmetries: Dih5, Dih2, and Dih1, and 4 cyclic group symmetries: Z10, Z5, Z2, and Z1.

    These 8 symmetries can be seen in 10 distinct symmetries on the decagon, a larger number because the lines of reflections can either pass through vertices or edges. John Conway labels these by a letter and group order. Full symmetry of the regular form is r20 and no symmetry is labeled a1. The dihedral symmetries are divided depending on whether they pass through vertices (d for diagonal) or edges (p for perpendiculars), and i when reflection lines path through both edges and vertices. Cyclic symmetries in the middle column are labeled as g for their central gyration orders.

    Each subgroup symmetry allows one or more degrees of freedom for irregular forms. Only the g10 subgroup has no degrees of freedom but can seen as directed edges.

    The highest symmetry irregular decagons are d10, a isogonal decagon constructed by five mirrors which can alternate long and short edges, and p10, an isotoxal decagon, constructed with equal edge lengths, but vertices alternating two different internal angles. These two forms are duals of each other and have half the symmetry order of the regular decagon.

    Dissection of regular decagon

    Coxeter states that every parallel-sided 2m-gon can be divided into m(m-1)/2 rhombs. For the decagon, m=5, and it can be divided into 10 rhombs, with one example shown below. This decomposition can be seen as 10 of 80 faces in a Petrie polygon projection plane of the 5-cube. A second dissection is based on 10 of 30 faces of the rhombic triacontahedron.

    Skew decagon

    A skew decagon is a skew polygon with 10 vertices and edges but not existing on the same plane. The interior of such an decagon is not generally defined. A skew zig-zag decagon has vertices alternating between two parallel planes.

    A regular skew decagon is vertex-transitive with equal edge lengths. In 3-dimensions it will be a zig-zag skew decagon and can be seen in the vertices and side edges of a pentagonal antiprism, pentagrammic antiprism, and pentagrammic crossed-antiprism with the same D5d, [2+,10] symmetry, order 20.

    These can also be seen in these 4 convex polyhedra with icosahedral symmetry. The polygons on the perimeter of these projections are regular skew decagons.

    Petrie polygons

    The regular skew decagon is the Petrie polygon for many higher-dimensional polytopes, shown in these orthogonal projections in various Coxeter planes: The number of sides in the Petrie polygon is equal to the Coxeter number, h, for each symmetry family.

    References

    Decagon Wikipedia


    Similar Topics