Manufacturer Auto Union AG Assembly Zwickau Transmission 3-speed manual | Production 1935–1936 Layout FF layout | |
 | ||
Engine 584 cc & 692 cc
two-stroke straight-2 | ||
The DKW F5 is a sub compact front wheel drive saloon launched by Auto Union’s DKW division in 1935 as a replacement for the DKWs F4 (Meisterklasse) and F2 (Reichsklasse) models.
Contents
The body
The appearance of the F5 was little changed from those of the F2 and F4. However, the timber frame construction of the central portion of the body was, in the F5, replaced with a steel frame. The outer skin of the body remained of fabric construction, with plywood support.
There were two broadly similar F5 saloons, sold as the Reichsklasse and Meisterklasse. They shared the same track and wheelbase, but the Meisterklasse was 3.5 cm longer. There were also two-seater cabriolet versions of each, along with a lighter bodied ‘Front Luxus Sport’ sports cabriolet for which a higher top speed of 90 km/h (56 mph) was claimed.
Engine and running gear
The cars had the two-cylinder two-stroke engines of their predecessors. The Reichsklasse engine was of 584 cc with an output of 18 bhp (13 kW). The Meisterklasse’s 692 cc engine had an output of 20 bhp (15 kW). Respective claimed top speeds were 80 km/h (50 mph) and 85 km/h (53 mph).
DKW had been producing small front wheel drive sedans since 1931. The incorporation of front wheel drive in the F5 was at this time still strikingly innovative in terms of the wider auto market, however.
The car featured a three-speed manual transmission system.
Commercial
Production of the F5 saloon ended in 1936 while production of the 20 bhp (15 kW) cabriolet versions continued for a further year. The car was replaced by the DKW F7. By the time that happened, approximately 60,000 F5s had been produced, placing this car among Germany’s top sellers.