Trisha Shetty (Editor)

Curtiss F11C Goshawk

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Top speed
  
325 km/h

Length
  
6.88 m

Wingspan
  
9.6 m

First flight
  
September 1932

Curtiss F11C Goshawk httpsuploadwikimediaorgwikipediacommons22

Manufacturer
  
Curtiss Aeroplane and Motor Company

The Curtiss F11C Goshawk was a 1930s United States naval biplane fighter aircraft that saw limited success but was part of a long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.

Contents

Curtiss F11C Goshawk Curtiss F11C Goshawk Travel for Aircraft

Design and development

Curtiss F11C Goshawk The Curtiss F11C quotGoshawkquot Page

In April 1932, when Curtiss was planning the Model 35B, the United States Navy contracted with the manufacturer for an improved derivative of the Model 34C, F6C as the F11C. It contained major changes that included the 600 hp (450 kW) Wright R-1510-98 radial engine, single-leg cantilever main landing-gear units, a slight increase in the interplane gap, metal- rather than fabric-covered control surfaces, and armament based on two .30 in (7.62 mm) fixed forward-firing machine guns supplemented by a hardpoint under the fuselage for the carriage of a 474 lb (215 kg) bomb, or an auxiliary fuel tank. Curtiss designed the type as the Model 64 Goshawk, with the U.S. Navy designation XF11C-1 (later XBFC-1 after the adoption of the BF for Bomber-Fighter category). The aircraft was of fabric-covered metal construction, used the wing cell structure of the dismantled YP-23, and was delivered in September 1932.

Curtiss F11C Goshawk Curtiss F11C Goshawk naval multipurpose

Shortly before ordering the XF11C-1, the Navy had bought a company-owned Model 64A demonstrator. This had a Wright R-1820-78 Cyclone engine, slightly longer main landing-gear legs carrying wheels with low-pressure tires, a tailwheel in place of the tailskid, fabric-covered control surfaces on the tail, and external provision for underwing racks for light bombs as well as an under-fuselage hardpoint for either a 50 gal (189 l) fuel tank or the crutch that would swing a bomb clear of the propeller disc before release in a dive-bombing attack.

Flight trials of this XF11C-2 (later redesignated as the XBFC-2) revealed the need for a small number of minor changes. After making the changes, the XF11C-2 came to be regarded as the prototype for the F11C-2, of which 28 examples were ordered as dual-role fighter-bombers in October 1932.

From March 1934, the aircraft were revised with a semi-enclosed cockpit and a number of other modifications before they received the revised designation BFC-2 in recognition of their fighter-bomber or, as the Navy would have it, bomber-fighter role The last aircraft in the XF11C-2 contract was converted to the prototype XF11C-3, incorporating a more powerful R-1820-80 engine and a hand-operated retractable landing gear.

Operational history

The only U.S. Navy units to operate the F11C-2 were the Navy's famous "High Hat Squadron", VF-1B, aboard the carrier Saratoga, and VB-6 briefly assigned to Enterprise. In March 1934, when the aircraft were redesignated BFC-2, the "High Hat Squadron" was renumbered VB-2B, and then VB-3B, and retained its BFC-2s until February 1938. VB-6 never actually embarked on Enterprise with the BFC bombers.

The F11C-2 Goshawk was produced in two export versions as the Hawk I and Hawk II fighters. Essentially a modified XF11C-2, the Hawk II was fitted with a Wright R-1820F-3 Cyclone rated at 710 hp (530 kW) at 1,676 m (5,499 ft) and 356 liters of fuel while the Hawk I had 189 liters of internal fuel. Both versions carried the same armament as the production F11C-2. Only the Hawk II was exported in quantity with Turkey, the first customer taking delivery of 19 on August 30, 1932. Colombia placed an order at the end of October 1932, receiving an initial batch of four twin float-equipped Hawk IIs, the first of a total of 26 float fighters delivered by the end of July 1934. The Colombian Air Force used Hawk II and F11C-2 based in floats in the Colombia-Peru War in 1932-1933. Nine Hawk IIs were supplied to Bolivia, of which three had interchangeable wheel/float undercarriages; four were delivered to Chile, 52 to China, four to Cuba, two to Germany, one to Norway and 12 to Thailand as Hawk IIIs.

Thai Hawk IIIs saw action during World War II, including against the Royal Air Force. On 8 April 1944, a Thai Hawk III was shot down by a No. 211 Squadron RAF Bristol Beaufighter over Lamphun, the pilot of the downed aircraft escaping by parachute.

Variants

XF11C-1 (Model 64)
First prototype derived from the F6C Hawk.
XF11C-2 (Model 64A)
Second prototype, redesignated XBFC-2.
F11C-2 (Model 64A)
Production version, redesignated BFC-2; 28 built.
XF11C-3 (Model 67)
One F11C-2 fitted with retractable undercarriage and a 700 hp (520 kW) R-1820-80, later redesignated XBF2C-1 fighter-bomber.
BFC-2 Hawk
Redesignation of F11C-2.

Operators

 Bolivia
  • Bolivian Air Force
  •  Chile
  • Chilean Air Force
  •  Republic of China
  • Chinese Nationalist Air Force
  •  Colombia
  • Colombian Air Force - Used in the Colombia-Peru War.
  •  Cuba
  • Cuban Air Force
  •  Germany
  • Two aircraft were bought by Germany for evaluation. One of them, D-3165, was tested as a floatplane.
  •  Norway
  • Royal Norwegian Air Force - One aircraft purchased for evaluation purposes.
  •  Thailand
  • Royal Thai Air Force
  •  Turkey
  • Turkish Air Force
  •  Peru
  • Peruvian Navy - Three float-equipped aircraft were purchased in March 1933. Four additional machines were bought in 1934.
  •  United States
  • United States Navy operated 28 aircraft as the squadron VF-1B, flying from the aircraft carrier Saratoga.
  • Survivors

    During the spring of 1933, Franz Muller who was a senior official in the Reich Air Ministry, informed Göring that he was approached by Udet to seek approval for the purchase of two Goshawks for dive bombing trials. Göring authorized the funds via the German Embassy in Washington DC. In October 1933 the pair of Goshawks arrived in Bremerhaven aboard the liner SS Europa. Udet used one of these Goshawks (designated D-IRIK) in aerobatic exhibitions held during the 1936 Summer Olympics, the aircraft survived the war, was eventually found in a field outside Kraków, and its relatively intact fuselage is now on display in the Polish Aviation Museum.

    A BFC-2 is in the National Museum of Naval Aviation on NAS Pensacola, Florida, USA.

    A Hawk III, the only one existing, has been restored by the Royal Thai Air Force Museum. The aircraft on display is painted with (Hanuman, white body) insignia identifying it as belonging to Wing 4. The Hawk III served in the RTAF between 1934–1949.

    Specifications (F11C-2) & (BFC-2)

    Data from "The Complete Encyclopedia of World Aircraft"

    General characteristics

  • Crew: one
  • Length: 22 ft 7 in (6.88 m)
  • Wingspan: 31 ft 6 in (9.6 m)
  • Height: 9 ft 8.625 in (2.96 m)
  • Wing area: 262 ft² (24.34 m²)
  • Empty weight: 3,037 lb (1,378 kg)
  • Max. takeoff weight: 4,132 lb (1,874 kg)
  • Powerplant: 1 × Wright R-1820-78 Cyclone Air-cooled radial engine, 700 hp (522 kW)
  • Performance

  • Maximum speed: 202 mph (325 km/h)
  • Cruise speed: 150 mph (241 km/h)
  • Service ceiling: 25,100 ft (7,650 m)
  • Rate of climb: 2,300 ft/min (701 m/min)
  • Armament

  • 2 fixed, synchronized .30 in (7.62 mm) M1919 Browning machine guns in the forward fuselage
  • 1 215 kg (474 lb) bomb on an under-fuselage hardpoint or 2 53 kg (117 lb) bombs carried one under each lower wing
  • References

    Curtiss F11C Goshawk Wikipedia


    Similar Topics