Rahul Sharma (Editor)

Champion Freedom Falcon

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
First flight
  
1982

The Champion Freedom Falcon is an American mid-wing, T-tailed, pusher configuration, single-seat motor glider that was designed and constructed by Ken Champion, first flying in 1982.

Contents

Design and development

The Freedom Falcon was constructed with a wooden frame, covered with plywood and doped aircraft fabric covering. It mounts a 36 hp (27 kW) OMC Golden Phantom Wankel engine behind the cockpit, with the variable-pitch propeller above the tail boom. The 42 ft (12.8 m) span wing employs a Göttingen 549 airfoil and mounts spoilers for glidepath control.

Only one example was completed and it was registered with the US Federal Aviation Administration in the Experimental - amateur-built category. FAA records indicate that the aircraft's registration expired on 30 June 2011 and was not renewed, so it is unknown whether the aircraft still exists.

Specifications (Freedom Falcon)

Data from Sailplane Directory

General characteristics

  • Crew: one
  • Wingspan: 42 ft 0 in (12.80 m)
  • Airfoil: Göttingen 549
  • Empty weight: 515 lb (234 kg)
  • Powerplant: 1 × Outboard Marine Corporation Golden Phantom Wankel engine
  • Performance

  • Maximum glide ratio: 26:1 at 48 mph (77 km/h)
  • Rate of sink: 156 ft/min (0.79 m/s)
  • References

    Champion Freedom Falcon Wikipedia