Type of site Cloud computing Website cadec-online.com | Created by Ever J. Barbero | |
 | ||
Available in English, Spanish, Portuguese, Farsi Headquarters Morgantown, West Virginia Slogan(s) Cloud Laminate Analysis Software | ||
cadec-online.com is a multilingual web application that performs analysis of composite materials and is used primarily for teaching, especially within the disciplines of aerospace engineering, materials science, naval engineering, mechanical engineering, and civil engineering. Users navigate the application through a tree view which structures the component chapters. cadec-online is an engineering cloud application. It uses the LaTeX library to render equations and symbols, then Sprites to optimize the delivery of images to the page.
Contents
Micromechanics
cadec-online.com implements micromechanics for composites reinforced with unidirectional fibers, and random fibers, as well as plain weave, twill, and satin textiles. It predicts lamina elastic moduli, strength values, coefficient of thermal expansion (CTE), moisture expansion, and other micromechanical properties. The application conducts this analysis through several theoretical models, including:
Lamina analysis
cadec-online.com can calculate the three-dimensional (3D) stiffness and compliance matrices, the two-dimensional (2D) reduced stiffness and compliance matrices, in lamina coordinate system (cs). It is also capable of transforming the composite laminates matrices to any other coordinate system. Lamina types supported by the software include:
Laminate analysis
The application can carry out laminate analyses including calculation of laminate stiffness, stress, strain, and failure. The software supports intact and damaged laminates (see damage mechanics). For each category, cadec-online.com can calculate the laminate thermal stresses, laminate coefficient of thermal expansion, laminate stiffness and compliance matrices for composite laminates. Also, the application can predict the laminate moduli, which are orthotropic material equivalents for the stiffness of the laminate in both bending and membrane modes of deformation.
Failure analysis
cadec-online.com predicts failures such as first ply failure (FPF) and last ply failure (LPF) under mechanical, thermal, and moisture loads, as well as insitu effects, using several failure criteria (FC) including:
Damage Mechanics
Uses discrete damage mechanics (DDM) to predict crack density vs. strain for any symmetric laminate subjected to any membrane state of strain. The results can be exported to Excel for plotting. The state variable describing the damage state of the material is the crack density in each ply. The thermodynamic force is the midsurface strain applied to the laminate. The relevant material properties are the fracture toughnesses in modes I (opening) and II (shear) of the ply.
Textile reinforced composite analysis
The application can predict the stiffness and strength of composite materials reinforced with plain weave, twill, and satin textile, also called fabric. The textile lamina is idealized as a transversely isotropic material. The calculated textile lamina can be used as any other lamina in the rest of the application. The calculated properties include:
Thin walled beam analysis
The application is able to analyze laminated composite thin walled beams with general cross sections. Beams can be asymmetric and loaded by general combinations of forces in three planes (axial, vertical and horizontal) as well as by three moments (torque and two bending moments). cadec-online.com computes section properties such as the shear center.
Mechanical and environmental loads
cadec-online.com defines four different types of loads:
Application programming interface
cadec-online.com features an API that allows users to access virtually all of the capabilities present in the web version of the software from other software environments such as Abaqus, Ansys, Matlab, Python, .NET Framework, Mathematica, etc.