Suvarna Garge (Editor)

British Rail Classes 445 and 446

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
In service
  
1971-1980

Built at
  
BREL York

Constructed
  
1971

Manufacturer
  
BREL

Family name
  
1972 design (PEP)

British Rail Classes 445 and 446

Order no.
  
30818 (DMSO, 445, 446) 30819 (MSO, 445)

The PEP Stock were prototype electric multiple units used on British Rail's Southern and Scottish Regions during the 1970s and early 1980s. They were forerunners of the British Rail Second Generation electric multiple unit fleet. Three units were built, one two-car unit (2001), and two four-car units (4001/4002). Under TOPS, the driving cars were originally classified as Class 461 with the non-driving motor cars as Class 462. They were later reclassified as Class 445 (4PEP) and Class 446 (2PEP).

Contents

Internal layout was for commuter services; low-backed, bus-style 2+2 seating in open saloons, wide gangways with hanging straps, and no lavatory facilities. They were the first electric multiple units designed by British Rail with electric sliding doors, outside the Scottish Region. They were unable to operate with any other stock due to their new coupling system. Externally, 2001 was finished in unpainted aluminium, while 4001/4002 were painted in all-over Rail Blue. In passenger use, they normally operated together as a ten-car formation.

Passenger use

All three units were initially assigned to the South Western Division of the Southern Region, based at Wimbledon Park and Strawberry Hill. Upon arrival, they were used under an extensive testing programme prior to entering full passenger service in June 1973, on services from Waterloo to Chessington South, Hampton Court and Shepperton. In August 1973, all three units were moved to the South Eastern Division, where they worked services from Cannon Street/Charing Cross to Bromley North, Dartford and Sevenoaks. Although capable of being used as a single 10-car formation on the SED, a number of failures saw them returned to the SWD after a month. The Class 446 unit was withdrawn from traffic in August 1974, while the two Class 445s were officially withdrawn from revenue service in May 1977.

Departmental use

After the units were withdrawn from passenger service, they continued to be used by the Research department for further tests. For this purpose, the units and individual carriages were all renumbered into the departmental series. The two Class 446 power cars were teamed with a newly built pantograph trailer and became TOPS Class 920, number 920001. This was then used for the development of classes 313-315. The two Class 445 four car sets became TOPS Class 935, numbered 056 and 057 in the Southern Region departmental (non-revenue earning) unit series. 056 saw little use, being stored at Wimbledon Park until June 1980, when it was transferred to the Railway Technical Centre at Derby, while 057 was used as a testbed for a number of new bogie designs between 1979 and 1983.

Production classes

The production-run classes which are most visibly similar to the PEP Stock are the dual voltage 750 V DC / 25 kV AC Class 313, the 25 kV AC Classes 314 and 315, and the 750 V DC Classes 507 and 508. It was also planned that the rolling stock for the services through the proposed Picc-Vic tunnel, intended as Class 316, would have formed part of the PEP family. However, subsequent builds have also drawn heavily on the experience gained by this stock.

The PEP units had three sets of sliding doors on each of the non-driving cars for handling dense inner-suburban traffic. However, the Class 313 and all subsequent builds, including later Mark 3-based units, have only had two sets of doors per car.

Disposal

All three units were finally taken out of use in the mid-1980s. None of the cars has survived; 920001 was scrapped in 1987, 056 in 1986 and 057 in 1990.

Formations

The unit formations in passenger and departmental service were:

References

British Rail Classes 445 and 446 Wikipedia