 | ||
Bradley aerobat test
The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.
Contents
Design and development
The BA 100 Aerobat features a cantilever low-wing, a single-seat enclosed cockpit under a bubble canopy, fixed tricycle landing gear, or optional conventional landing gear, and a single engine in tractor configuration.
The all-metal aircraft is made from sheet aluminum. Its 18.40 ft (5.6 m) span wing lacks flaps and has a wing area of 63.00 sq ft (5.853 m2). The cabin width is 22 in (56 cm). The acceptable power range is 70 to 100 hp (52 to 75 kW) and the standard powerplant is the 70 hp (52 kW) Volkswagen air-cooled engine. For aerobatics the BA 100 is stressed to +/-9g
The BA 100 Aerobat has a typical empty weight of 348 lb (158 kg) and a gross weight of 620 lb (280 kg), giving a useful load of 272 lb (123 kg). With full fuel of 10 U.S. gallons (38 L; 8.3 imp gal) the payload for pilot and baggage is 212 lb (96 kg).
Factory kit options included conventional landing gear and a STOL kit. The manufacturer estimated the construction time from the supplied kit as 150 hours.
Operational history
By 1998 the company reported that 33 kits had been sold and 28 aircraft were flying.
In December 2013 three examples were registered in the United States with the Federal Aviation Administration.
Specifications (BA 100 Aerobat)
Data from AeroCrafter
General characteristics
Performance