Place of origin United Kingdom | In service 1880 - 19?? | |
 | ||
Type Naval gun
Coast defence gun Used by Royal Navy
Australian Colonies Designer Elswick Ordnance Company Manufacturer Elswick Ordnance Company | ||
The BL 6 inch 80 pounder gun Mk I was the first generation of British 6-inch breechloading naval gun after it switched from muzzle-loaders in 1880. They were originally designed to use the old gunpowder propellants.
Contents
Mk I 80-pounder
Mk I of 80 cwt (4 tons) as originally built was an Elswick Ordnance design which was weakly made and fired only an 80-pound (36 kg) projectile. It consisted of a steel barrel with wrought-iron coils shrunk over it. A few guns were issued to the Royal Navy but most were replaced by the later versions. Mk I guns remaining in British service were rebuilt with "chase hoops" added around the barrel for strengthening, and the barrel was shortened by 3 inches to keep its centre of gravity at the trunnions. This resulted in the 81 cwt Mk I gun.
The breech was rotated to the left to lock it, unlike standard British service BL guns made by the Royal Gun Factory which all rotated to the right to lock.
These guns are commonly referred to as "6-in. 81-cwt B.L.R." in contemporaneous publications such as Brassey's Naval Annual. The official designation in British ordnance manuals was "80-pounder BL" to differentiate it and its ammunition from the later marks of 6-inch BL guns which fired 100-pound projectiles.
80-pounder in Australian colonial service
Australian colonies and New Zealand purchased various 6-inch guns direct from the manufacturers, usually Elswick Ordnance Company, and these versions do not correspond directly with the official "Marks" as adopted by the British government. Specifications of guns purchased by Australian colonies are similar to those of the original British Mk I 80 cwt gun, firing an 80-pound projectile.
The gun equipped some gunboats of the Australian colonial navies :
Also on armed harbour vessels in Victoria :