Samiksha Jaiswal (Editor)

Arado E.340

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Wingspan
  
23 m

Manufacturer
  
Length
  
19 m

Arado E.340 Arado Ar E340

The Arado Ar E.340 was a twin-engined dive- and tactical-medium bomber designed by Arado Flugzeugwerke at the request of the Reich Air Ministry in 1939 to compete for a production contract for the Bomber B fast bomber design competition, but the project was cancelled.

Contents

Arado E.340 Arado Ar E340

Design and development

Arado E.340 Arado Ar E340 Medium Bomber Concept Aircraft

The Reich Air Ministry ordered the aircraft to replace the Junkers Ju 88 and Dornier Do 217 bombers by 1943. Four manufacturers submitted plans to the Air Ministry, which chose the Arado design. The engines were positioned in a unique twin-boom arrangement connected only through the wing assembly, a set-up which offered the crew better visibility.

Arado E.340 wwwluft46comarado3ba340jpg

The Arado E.340 was designed with a central fuselage containing all 4 crew members. The cockpit and rear compartment were glazed and pressurized. The Jumo engines and landing gear were mounted to the load-bearing wing centre-section. The tail of the aircraft was a unique design where the tailplane did not connect the two booms but was cantilevered outwards instead, each similar to the asymmetric BV 141B booms and tail arrangement. Also similarly, this would have provided the rear gunner with a clear range of fire directly behind. The fuselage extended forwards beyond the engines, with the gunners situated behind the cockpit, ahead of the bomb-bay and wing spars. The MG 151 cannons in the tail of the central fuselage would have been controlled with remote aiming through periscopes. There were also two remote-controlled Fernbedienbare Drehlafette FDL 131 13mm gun turrets to be placed above and below the fuselage.

Arado E.340 172 scale Arado ArE340 BomberB program to replace the Junkers

The E.340 was one of the steadily growing number of later-war military airframe designs meant to use the troublesome Junkers Jumo 222 engine, Otherwise an innovative design, these powerful engines were selected because they would have allowed the Arado E.340 to carry the required payload 5,900 kg (13,000 lb) within a relatively compact airframe, despite their still-strictly developmental nature. As the engines were cancelled, the project would likely have failed due to the lack of engines of suitable power, and could have struggled with amount of high grade fuel needed to power them. Ultimately, the entire Bomber B project was cancelled primarily as a result of the failure to develop the required engines.

Specifications

Data from Arado E.340

General characteristics

Arado E.340 172 scale Arado ArE340 BomberB program to replace the Junkers

  • Crew: 4
  • Length: 18.65 m (61 ft 2 in)
  • Wingspan: 22.98 m (75 ft 5 in)
  • Max takeoff weight: 24,000 kg (52,911 lb)
  • Powerplant: 2 × Jumo 222 or Daimler-Benz DB 604 or BMW 802 large piston engines
  • Performance

  • Range: 3,600 km (2,237 mi; 1,944 nmi) with 2,000 kg (4,400 lb) bomb load
  • Armament

  • Guns:
  • Rockets: 6

  • Arado E.340 Arado Ar E340 AviationMegastorecom

    References

    Arado E.340 Wikipedia