Puneet Varma (Editor)

Anilite bomb

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
Aerial bomb

In service
  
World War One

Designed
  
1915-16

Place of origin
  
France

Used by
  
Allied Forces

Weight
  
10 kg (22 lb)25 kg (55 lb)50 kg (110 lb)

Anilite bombs, also known as Gros Andreau bombs, were introduced early in the First World War for dropping from aircraft.

Contents

Description

The Anilite bomb consisted of two compartments; one filled with gaseous Nitrogen Dioxide (NO2) and another filled with Gasoline or any other suitable / available hydrocarbon to proportions of 80% NO2 and 20% hydrocarbon as oxidiser and fuel respectively.

Once released the two components mixed inside the casing becoming explosive after mixing. This gave the advantage of relatively safe handling with low risk of premature detonation, even with rough handling. If the bomb components did not mix or the gas leaked, the bomb became an incendiary device. Disadvantages included the toxicity of the NO2 if leakage occurred, with several instances of crews being poisoned and incapacitated by leaking bombs and the relative fragile nature of the casing which meant that the bombs had none or little penetration on impact, limiting their effectiveness.

The Gros Andreau bombs were produced in three calibres:

120 mm (4.72 in)
weighing 10 kg (22 lb), containing 6 kg (13 lb) of explosive.
155 mm (6.10 in)
weighing 25 kg (55 lb), containing 12 kg (26 lb) of explosive.
200 mm (7.87 in)
weighing 50 kg (110 lb), containing 25 kg (55 lb) of explosive.

Operational history

Gros Andreau bombs proved effective and relatively safe to use and were first dropped on Karlsruhe on 22 June 1916, being withdrawn from use in 1918 and replaced with bombs filled with Melinite (picric acid and guncotton) and Mononitronaphthalene known as MMN bombs.

References

Anilite bomb Wikipedia


Similar Topics