Ancient Greek furniture was typically constructed out of wood, though it might also be made of stone or metal, such as bronze, iron, gold and silver. Little wood survives from ancient Greece, though varieties mentioned in texts concerning Greece and Rome include maple, oak, beech, yew, and willow. Pieces were assembled using mortise-and-tenon joinery, held together with lashings, pegs, metal nails, and glue. Wood was shaped by carving, steam treatment, and the lathe, and furniture is known to have been decorated with ivory, tortoise shell, glass, gold or other precious materials. Similarly, furniture could be veneered with expensive types of wood in order to make the object appear more costly, though classical furniture was often pared down in comparison to objects attested in the East, or those from earlier periods in Greece.
Extensive research was done on the forms of Greek furniture by Gisela Richter, who utilized a typological approach based primarily on illustrated examples depicted in Greek art, and it is from Richter’s account that the main types can be delineated.
The modern word “throne” is derived from the ancient Greek thronos (Greek singular: θρόνος), which was a seat designated for deities or individuals of high status or honor. The colossal chryselephantine statue of Zeus at Olympia, constructed by Phidias and lost in antiquity, featured the god Zeus seated on an elaborate throne, which was decorated with gold, precious stones, ebony and ivory, according to Pausanias. Less extravagant though more influential in later periods is the klismos (Greek singular: κλισμός), an elegant Greek chair with a curved backrest and legs whose form was copied by the Romans and is now part of the vocabulary of furniture design. A fine example is shown on the grave stele of Hegeso, dating to the late fifth century B.C.E. As with earlier furniture from the east, the klismos and thronos could be accompanied by footstools. There are three types of footstools outlined by Richter – those with plain straight legs, those with curved legs, and those shaped like boxes that would have sat directly on the ground.
The most common form of Greek seat was the backless stool, which must have been found in every Greek home. These were apparently known as diphroi (Greek singular: δίφρος), and were easily portable. The Parthenon frieze displays numerous examples, upon which the gods are seated. Several fragments of a stool were discovered in a fourth-century B.C.E. tomb in Thessaloniki, including two of the legs and four transverse stretchers. Once made of wood and covered in silver foil, all that remains of this piece are the parts made of precious metal.
The folding stool, known as the diphros okladias (Greek singular: δίφρος ὀκλαδίας), was practical and portable. The Greek folding stool survives in numerous depictions, indicating its popularity in the Archaic and Classical periods; the type may have been derived from earlier Minoan and Mycenaean examples, which in turn were likely based on Egyptian models. Greek folding stools might have plain straight legs or curved legs that typically ended in animal feet.
A couch or kline (Roman singular: κλίνη) was a form used in Greece as early as the late seventh century B.C.E. The kline was rectangular and supported on four legs, two of which could be longer than the other, providing support for an armrest or headboard. Three types are distinguished by Richter – those with animal legs, those with “turned” legs, and those with “rectangular” legs, although this terminology is somewhat problematic. Fabric would have been draped over the woven platform of the couch, and cushions would have been placed against the arm or headrest, making the Greek couch an item well suited for a symposium gathering. The foot of a bronze bed discovered in situ in the House of the Seals at Delos provides an indication of how the “turned” legs of a kline might have appeared. Numerous images of klinai are displayed on vases, topped by layers of intricately woven fabrics and pillows. These furnishings would have been made of leather, wool, or linen, though silk could also have been used. Stuffing for pillows, cushions, and beds could have been made of wool, feathers, leaves, or hay.
In general, Greek tables (Greek singular: τράπεζα, τρἰπους, τετράπους, φάτνη, ὲλεóς) were low and often appear in depictions alongside klinai and could perhaps fit underneath. The most common type of Greek table had a rectangular top supported on three legs, though numerous configurations exist. Tables could have circular tops, and four legs or even one central leg instead of three. Tables in ancient Greece were used mostly for dining purposes – in depictions of banquets, it appears as though each participant would have utilized a single table, rather than a collective use of a larger piece. On such occasions, tables would have been moved according to one's needs.
Tables also would have figured prominently in religious contexts, as indicated in vase paintings. One example by the Chicago Painter from The Art Institute of Chicago, dating to around 450 B.C.E., shows an image of three women performing a Dionysian ritual, in which a table functions as an appropriate place to rest a kantharos – a wine vessel associated with Dionysus. Other images indicate that tables could range in style from the highly ornate to the relatively unadorned.
To a large extent, the types and styles of ancient Roman furniture followed those of their Classical and Hellenistic Greek predecessors. Because of this it is difficult to differentiate Roman forms from earlier Hellenistic ones in many cases. Gisela Richter’s typological approach is useful in tracing developments of Greek furniture into Roman expressions. Knowledge of Roman furniture is derived mainly from depictions in frescoes and representations in sculpture, along with actual pieces of furniture, fragments, and fittings, several of which were preserved by the eruption of Vesuvius in AD 79. The most well-known archaeological sites with preserved images and fragments from the eruption are Pompeii and Herculaneum in Italy. There are fine examples of reconstructed Roman furniture at the Metropolitan Museum of Art in New York City as well as the Capitoline Museum in Rome.
The sella, or stool or chair, was the most common type of seating in the Roman period, probably because of its easy portability. In addition, the sella in its simplest form was inexpensive to make. Both slaves and emperors used it, although those of the poor were surely plain, while the wealthy had access to precious woods, ornamented with inlay, metal fittings, ivory, and silver and gold leaf. Bronze sellae from Herculaneum were square in form and had straight legs, decorative stretchers, and a dished seat. The sella curulis, or folding stool, was an important indicator of power in the Roman period. There were sellae resembling both stools and chairs that folded in a scissor fashion to facilitate transport.
The Roman cathedra was a chair with a back, although there is disagreement as to the exact meaning of the Latin term. Richter defines the cathedra as a later version of the Greek klismos, which she says was never as popular as its Greek predecessor. A. T. Croom, however, considers the cathedra to be a high-backed wickerwork chair that was typically associated with women. They have also been seen being used as early school teachers, pupils would sit around him in this chair while he taught. It showed who held the seat of power in the classroom. As with Greek furniture, the names of various Roman types as found in texts cannot always be associated with known furniture forms with certainty.
The Latin solium is considered to be equivalent to the Greek term thronos and thus is often translated as “throne.” These were like modern chairs, with backs and arm rests. Three types of solia based on Greek prototypes are distinguished by Richter: thrones with “turned” and “rectangular” legs and grandiose thrones with solid sides, of which several examples survive in stone. In addition, a type with a high back and arms, resting upon a cylindrical or conical base, is said to derive from Etruscan prototypes.
Few actual Roman couches survive, although sometimes the bronze fittings do, which help with the reconstruction of the original forms. While in wealthy households beds were used for sleeping in the bedrooms (lectus cubicularis), and couches for banqueting while reclining were used in the dining rooms (lectus tricliniaris), the less well off might use the same piece of furniture for both functions. The two types might be used interchangeably even in richer households, and it is not always easy to differentiate between sleeping and dining furniture. The most common type of Roman bed took the form of a three-sided, open rectangular box, with the fourth (long) side of the bed open for access. While some beds were framed with boards, others had slanted structures at the ends, called fulcra, to better accommodate pillows. The fulcra of elaborate dining couches often had sumptuous decorative attachments featuring ivory, bronze, copper, gold or silver ornamentation.
The bench, or subsellium, was an elongated stool for two or more users. Benches were considered to be “seats of the humble,” and were used in peasant houses, farms, and bathhouses. However, they were also found in lecture halls, in the vestibules of temples, and served as the seats of senators and judges. Roman benches, like their Greek precedents, were practical for the seating of large groups of people and were common in theaters, amphitheaters, odeons and auctions. The scamnum, related to the subsellium but smaller, was used as both a bench and a footstool.
Types of Roman tables include the abacus and the mensa, which are distinguished from one another in Latin texts. The term abacus might be used for utilitarian tables, such as those for making shoes or kneading dough, as well as high-status tables, such as sideboards for the display of silver. A low, three-legged table, thought to represent the mensa delphica, was often depicted next to reclining banqueters in Roman paintings. This table has a round tabletop supported by three legs configured like those of a tripod. Several wooden tables of this type were recovered from Herculaneum.
The most important source for wooden furniture of the Roman period is the collection of carbonized furniture from Herculaneum. While the eruption of Vesuvius in 79 C.E. was tremendously destructive to the region, the hot liquid lava that engulfed the town of Herculaneum ultimately preserved the wooden furniture, shelves, doors, and shutters in carbonized form. Their preservation, however, is imperiled, as some of the pieces remain in situ in their houses and shops, encased in unprotected glass or entirely open and accessible. Upon excavation, much of the furniture was conserved with paraffin wax mixed with carbon powder, which coats the wood and obscures important details such as decorations and joinery. It is now impossible to remove the wax coating without further damaging the furniture. Several wooden pieces were found with bone and metal fittings.
Wooden shelving and racks are fund in shops and kitchens in the Vesuvian sites, and one house has elaborate wooden room dividers.