6 meter band

History

On October 10, 1924, the 5-meter band (56–64 MHz) was first made available to amateurs in the United States by the Third National Radio Conference. On October 4, 1927, the band was allocated on a worldwide basis by the International Radiotelegraph Conference in Washington, D.C. 56–60 MHz was allocated for amateur and experimental use. There was no change to this allocation at the 1932 International Radiotelegraph Conference in Madrid.

At the 1938 International Radiocommunication Conference in Cairo, television broadcasting was given priority in a portion of the 5- and 6-meter band in Europe. Television and low power stations, meaning those with less than 1 kW power, were allocated 56–58.5 MHz and amateurs, experimenters and low power stations were allocated 58.5–60 MHz in the European region. The conference maintained the 56–60 MHz allocation for other regions and allowed administrations in Europe latitude to allow amateurs to continue using 56–58.5 MHz.

Starting in 1938, the FCC created 6 MHz wide television channel allocations working around the 5-meter amateur band with channel 2 occupying 50–56 MHz. In 1940, television channel 2 was reallocated to 60 MHz and TV channel 1 was moved to 50–56 MHz maintaining a gap for the 5-meter amateur band. When the US entered World War II, transmissions by amateur radio stations were suspended for the duration of the war. After the war, the 5-meter band was briefly reopened to amateurs from 56–60 MHz until March 1, 1946. At that time the FCC moved television channel 2 down to 54–60 MHz and reallocated channel 1 down to 44–50 MHz opening a gap that would become the Amateur radio 6-meter band in the United States. FCC Order 130-C went into effect at 3 am Eastern Standard Time on March 1, 1946 and created the 6-meter band allocation for the amateur service as 50–54 MHz. Emission types A1, A2, A3 and A4 were allowed for the entire band and special emission for Frequency modulation telephony was allowed from 52.5 to 54 MHz.

At the 1947 International Radio Conference in Atlantic City, New Jersey, the amateur service was allocated 50–54 MHz in ITU Region 2 and 3. Broadcasting was allocated from 41 to 68 MHz in ITU Region 1, but allowed exclusive amateur use of the 6-meter band (50–54 MHz) in a portion of southern Africa.

Amateurs in the United Kingdom remained in the 5-meter band (58.5–60 MHz) for a period of time following World War II, but lost the band to UK analogue television channel 4. They gained a 4-meter band in 1956 and eventually gained the 6-meter band from 50–52 MHz, when it was decided to terminate analogue television broadcasts on channel 2.

Amateur radio

The Radio Regulations of the International Telecommunication Union allow amateur radio operations in the frequency range from 50.000 to 54.000 MHz in ITU Region 2 and 3. At ITU level, Region 1 is allocated to broadcasting. However, in practice a large number of ITU Region 1 countries allow amateur use of at least some of the 6-meter band. Over the years portions have been vacated by VHF television broadcasting channels for one reason or another. In November 2015 the ITU World Radio Conference (WRC-15) agreed that for their next conference in 2019, Agenda Item 1.1 will study a future allocation of 50–54 MHz to amateur radio in Region 1.

Frequency allocations

6-meter frequency allocations for amateur radio are not universal worldwide. In the United States and Canada, the band ranges from 50 MHz to 54 MHz. In some other countries, the band is restricted to military communications. Further, in some nations, the frequency range is used for television transmissions, although most countries have assigned those television channels to higher frequencies (see channel 1).

Although the International Telecommunication Union does not allocate 6-meter frequencies to amateurs in Europe, the decline of VHF television broadcasts and commercial pressure on the lower VHF spectrum has allowed most European countries to provide a 6-meter amateur allocation.

In the United Kingdom, it is legal to use the 6-meter band between frequencies 50 and 52 MHz, with some limitations at some frequencies. In the UK, 50 to 51 MHz is primary usage and the rest is secondary with power limitations. A detailed bandplan can be obtained from the Radio Society of Great Britain (RSGB) website.

Many organizations promote regular competitions in this frequency range to promote its use and to familiarize operators to its quirks. For example, RSGB VHF Contest Committee has a large number of contests on 6 meters every year.

Because of its peculiarity, there are a number of 6-meter band operator groups. These people monitor the status of the band between different paths and promote 6-meter band operations.

For a full list of countries using 6 meters, refer to the bandplan of the International Amateur Radio Union.

Television interference

Because the 6 meter band is just below the frequencies allocated to the old VHF television Channel 2 in North America (54–60 MHz), television interference (TVI) to neighbors' sets was a common problem for amateurs operating in this band prior to June 2009, when analog television transmissions ended in the U.S.

Equipment

Over the past decade or so, the availability of transceivers that include the 6-meter band has increased greatly. Many commercial HF transceivers now include the 6-meter band, as do some handheld VHF/UHF transceivers. There are also a number of stand-alone 6-meter band transceivers, although commercial production of these has been relatively rare in recent years. Despite support in more available radios, however, the 6-meter band does not share the popularity of amateur radio's 2-meter band. This is due, in large part, to the larger size of 6-meter antennas, power limitations in some countries outside the United States, and the 6-meter band's greater susceptibility to local electrical interference.

As transceivers have become more available for the 6-meter band, it has quickly gained popularity. In many countries, including the United States, access is granted to entry-level license holders. Those without access to international HF frequencies often gain their first taste of true long-distance communications on the 6-meter band. Many of these operators develop a real affection for the challenge of the band, and often continue to devote much time to it, even when they gain access to the HF frequencies after upgrading their licenses.

For antennas, horizontal polarization is used for 6-meter weak signal, SSB communications using tropospheric propagation. Vertical polarization is used for FM communications, repeaters, radio control and for other propagation modes where polarization does not matter as much.

Common uses

Radio control hobby use

In North America, especially in the United States and Canada, the 6-meter band may be used by licensed amateurs for the safe operation of radio-controlled (RC) aircraft and other types of radio control hobby miniatures. By general agreement among the amateur radio community, 200 kHz of the 6-meter band is reserved for the telecommand of models, by licensed amateurs using amateur frequencies. The sub-band reserved for this use is 50.79 to 50.99 MHz with ten "specified" frequencies, numbered "00" to "09" spaced at 20 kHz apart from 50.800 to 50.980 MHz. The upper end of the band, starting at 53.0 MHz, and going upwards in 100 kHz steps to 53.8 MHz, used to be similarly reserved for RC modelers, but with the rise of amateur repeater stations operating above 53 MHz in the United States, and very few 53 MHz RC units in Canada, the move to the lower end of the 6-meter spectrum for radio-controlled model flying activities by amateur radio operators was undertaken in North America, starting in the early 1980s, and more-or-less completed by 1991. It is still completely legal for ground-level RC model operation (cars, boats, etc.) to be accomplished on any frequency within the band, above 50.1 MHz, by any licensed amateur operator in the United States; however, an indiscriminate choice of frequencies for RC operations is discouraged by the amateur radio community.

In the United States, the Federal Communications Commission's (FCC) Part 97.215 rules regulate telecommand of model craft in the amateur service within the United States. It allows a maximum radiated RF power output of one watt for RC model operations of any type.

In Canada, Industry Canada's RBR-4, Standards for the Operation of Radio Stations in the Amateur Radio Service, limits radio control of craft to amateur service frequencies above 30 MHz.