Trisha Shetty (Editor)

.476 Enfield

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
Revolver

In service
  
1881–1911

Neck diameter
  
.474 in (12.0 mm)

Place of origin
  
British Empire

Bullet diameter
  
.455 in (11.6 mm)

.476 Enfield

Used by
  

The .476 Enfield, also known as the .476 Eley, .476 Revolver, and occasionally .455/476, was a British centrefire black powder revolver cartridge. The Enfield name derives from the location of the Royal Small Arms Factory at Enfield Lock, the armoury where British Military Small Arms were produced, while Eley was a British commercial brand.Used in the Enfield Mk II revolver, the Mk III variant was introduced by the British Army in 1881, supplanting the earlier .476 Enfield Mark I and II cartridges, which in turn had replaced the .450 Adams cartridges, all of which also used black powder propellant.

Contents

British service use

The .476 Enfield cartridge was only in British service for a comparatively short period before it was replaced by the black powder-loaded .455 Webley Mark I in 1887 and then by the smokeless powder-loaded .455 Webley Mark II in September 1897. Just over 1,000 Enfield Mark IIs were issued to the North-West Mounted Police, and these remained in service until 1911, when the last Enfields were phased out in favour of more modern (and reliable) .45 Colt New Service revolvers.

Interchangeability

Using the same bullet as the .455 (11.6mm) Webley Mark I, the .476 casing was 0.05 mm (0.002 in) longer and carried a charge of 18 gr (1.17 g) of black powder, compared to 6.5 gr (0.42 g) of cordite in the .455 Mark I. While the .476 Enfield cartridge could be used in any British-manufactured .455 Webley calibre service revolver, there were issues with the later-production Colt or Smith & Wesson .455 Revolver models, which were liable to have slightly smaller bore diameters.

Despite the difference in designation, the .476 readily interchanged with the earlier .450 Adams and .455 Webley rounds (the latter in black powder Mark I and smokeless Marks II through VI), as well as the .455 Colt (a U.S. commercial brand for the same .455 Webley round, with slightly different ballistics), which all used the same .455 in (11.6mm) bullet, the distinction being which diameter was measured. Officially, .450 Adams, .476 Enfield, and .455 Webley cartridges could all be fired in the Webley Mark III British Government Model revolver; although case length, bullet weight and shape, and powder charge differed, all three cartridges featured a case diameter of .476 inch with a bullet diameter of .455 inch, which could be fired in a barrel of .450 inch bore.

References

.476 Enfield Wikipedia


Similar Topics