Neha Patil (Editor)

USS Waxsaw (1865)

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Name
  
USS Waxsaw

Commissioned
  
Never commissioned

Construction started
  
March 1863

Length
  
69 m

Laid down
  
March 1863

Class and type
  
Casco-class monitor

Launched
  
4 May 1865

Builder
  
A. & W. Denmead & Son, Baltimore, Maryland

Fate
  
Broken up, 25 August 1875

USS Waxsaw, a single-turreted, twin-screw monitor, was laid down in March 1863, before the official order had been placed, at Baltimore, Maryland, by A. & W. Denmead & Son; launched on 4 May 1865; and completed on 21 October 1865.

Contents

Waxsaw was a Casco-class, light-draft monitor intended for service in the shallow bays, rivers, and inlets of the Confederacy. These warships sacrificed armor plate for a shallow draft and were fitted with a ballast compartment designed to lower them in the water during battle.

Design revisions

Though the original designs for the Casco-class monitors were drawn by John Ericsson, the final revision was created by Chief Engineer Alban C. Stimers following Rear Admiral Samuel F. Du Pont's failed bombardment of Fort Sumter in 1863. By the time that the plans were put before the Monitor Board in New York City, Ericsson and Simers had a poor relationship, and Chief of the Bureau of Construction and Repair John Lenthall had little connection to the board. This resulted in the plans being approved and 20 vessels ordered without serious scrutiny of the new design. $14 million US was allocated for the construction of these vessels. It was discovered that Stimers had failed to compensate for the armor his revisions added to the original plan and this resulted in excessive stress on the wooden hull frames and a freeboard of only 3 inches. Stimers was removed from the control of the project and Ericsson was called in to undo the damage. He was forced to raise the hulls of the monitors under construction by 22 inches to make them seaworthy.

Fate

As a result, the Navy Department ordered on 24 June 1864 that Waxsaw's deck be raised to provide sufficient freeboard. Upon delivery, the monitor was laid up at the Philadelphia Navy Yard; and she saw no commissioned service.

She was renamed Niobe on 15 June 1869. She would be broken up at New York, NY by John Roach on 25 August 1875.

References

USS Waxsaw (1865) Wikipedia