Power type Steam Build date 1830 Length 13 ft 2 ⁄4 in (4.03 m) | Builder Peter Cooper Configuration 2-2-0 Height 12 ft 9 in (3.89 m) | |
 | ||
Tom Thumb was the first American-built steam locomotive to operate on a common-carrier railroad. Designed and constructed by Peter Cooper in 1830, it was built to convince owners of the newly formed Baltimore and Ohio Railroad (B&O) to use steam engines and not intended to enter revenue service. It is especially remembered as a participant in an impromptu race with a horse-drawn car, which the horse won after Tom Thumb suffered a mechanical failure. However, the demonstration was successful; and in the following year, the railroad committed to the use of steam locomotion and held trials for a working engine.
Contents
Background
The first railroads were little more than tracks on roads: horses pulled wagons and carriages with their wheels modified to ride on the rails. Only when the development of the steam engine had progressed to the point where such an engine could be mounted on wheels could trains be moved by steam power. The first steam locomotives were built in England, the birthplace of steam power; the first locomotives in America were imported from England. Soon, however, Americans began to plan their own locomotives.
Design and construction
Tom Thumb was designed by Peter Cooper as a four-wheel locomotive with a vertical boiler and vertically mounted cylinders that drove the wheels on one of the axles. The "design" was characterized by a host of improvisations. The boiler tubes were made from rifle barrels and a blower was mounted in the stack, driven by a belt to the powered axle. The engine was fueled by anthracite coal.
Cooper's interest in the railroad was by way of substantial real estate investment in what is now the Canton neighborhood of Baltimore. Success for the railroad was expected to increase the value of his holdings.
Construction was carried out in the machine shop of George W. Johnson, where the 18-year-old James Millholland was apprenticed. Millholland would later become a prominent locomotive designer in his own right.
Demonstration
Testing was performed on the company's track between Baltimore and Ellicott Mills (now Ellicott City, Maryland). Two tracks had been constructed, which led the owners of Stockton and Stokes stagecoach company to challenge the locomotive to a race, and on August 28, 1830, the race was held (but sources differ slightly on the date with variations including August 25 and September 28). The challenge accepted, Tom Thumb was easily able to pull away from the horse until the belt slipped off the blower pulley. Without the blower, the boiler did not draw adequately and the locomotive lost power, allowing the horse to pass and win the race. Nonetheless, it was realized that the locomotive offered superior performance.
Aftermath
Because Tom Thumb was not intended for revenue service, the locomotive was not preserved. Though Cooper and others associated with the railroad's early days left detailed descriptions which enabled the general dimensions and appearance to be worked out. In 1892, a wooden model was constructed by Major Joseph Pangborn, a western newspaperman and publicist, who also had models made of many other early locomotives. In 1927 the B&O hosted a centennial exhibition near Baltimore, titled "Fair of the Iron Horse," and had a replica constructed for the exhibition. This replica followed Pangborn's model and therefore differed considerably from the original, being somewhat larger and heavier, and considerably taller (note that the dimensions given above are those of the replica). Also, instead of the blower in the stack, a much larger blower was mounted on the platform to provide a forced draft, and the support frame of the cylinder and guides was considerably different.
The replica remains on display at the Baltimore and Ohio Railroad Museum. The museum lists the replica as operational, and the locomotive makes special appearances each year.