Supriya Ghosh (Editor)

Pennsylvania Canal (Susquehanna Division)

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Status
  
Historic, abandoned

Start point
  
Northumberland

Construction began
  
1827

Date completed
  
1831

Locks
  
12

Branch of
  
Pennsylvania Canal

Pennsylvania Canal (Susquehanna Division)

Original owner
  
Commonwealth of Pennsylvania

End point
  
Duncan's Island at the mouth of the Juniata River

Connects to
  
North Branch Division, West Branch Division, Juniata Division Canal, Eastern Division Canal, Wiconisco Canal

The Susquehanna Canal of the Pennsylvania Canal System was funded and authorized as part of the 1826 Main Line of Public Works enabling act, and would later become the Susquehanna Division of the Pennsylvania Canal under the Pennsylvania Canal Commission. Constructed early on in America's brief canal age, it formed an integral segment of the water focused transportation system which cut Philadelphia-Pittsburgh (pre-railroad) travel time from nearly a month to just four days. One of the system's navigations, the Susquehanna Canal/division created a mule-towed navigable channel 41 miles (66 km) along the west bank of the main stem of the Susquehanna River between a lock terminus near the mouth of the Juniata Tributary River and the canal basin at Northumberland. Meeting the West Branch Canal and the North Branch Canal at Northumberland, it formed a link between the public and private canals upriver and the main east–west Pennsylvania Canal route known as the Main Line of Public Works which was devised to connect Philadelphia to Pittsburgh, southern New York, northern Pennsylvania and Lake Erie using most of the far reaches of the Susquehanna's tributaries.

The engineering needs of the Susquehanna Canal, were modest in comparison to many contemporary projects, and construction was timed after other more difficult projects in the system were well under way. The Susquehanna Division Canal employed 12 locks overcoming a total of just 86 feet (26 m) in its 41 miles (66 km)s length It was begun in 1827 and was finished in 1831 in time to connect to traffic between the Union Canal and the Allegheny Portage Railroad, which lifted wheeled canal barges up on of the gaps of the Allegheny and over the Allegheny Plateau into the Allegheny-Ohio valleys.

Engineers faced complications at the southern end of the Susquehanna Division Canal, where it met the Juniata Division Canal and the Eastern Division Canal at Duncan's Island. Boats had to cross from one side of the Susquehanna River to the other between either the Susquehanna Division or the Juniata Division on the west side and the Eastern Division on the east side. They solved the problem by building a dam 1,998 feet (609 m) long and 8.5 feet (2.6 m) high between the lower end of Duncan's Island and the east bank of the Susquehanna. This formed a pool across which boats could be pulled from a wooden, two-tier towpath bridge at Clark's Ferry. Two Duncan's Island lift locks raised or lowered the boats traveling between the dam pool and the other canals.

References

Pennsylvania Canal (Susquehanna Division) Wikipedia