Samiksha Jaiswal (Editor)

Panzerkampfwagen E 100

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Type
  
Super-heavy tank

Manufacturer
  
Henschel

Length
  
10.27 m (33 ft 8 in)

Place of origin
  
Nazi Germany

No. built
  
1 partial prototype

Panzerkampfwagen E-100

Weight
  
140 tonnes (154 short tons; 138 long tons)

The Panzerkampfwagen E-100 (Gerät 383) (TG-01) was a German super-heavy tank design developed towards the end of World War II. It was proposed to be the basis for a heavy artillery system, an anti-aircraft vehicle, and a heavy tank destroyer - however - by the end of World War II the chassis of the E-100 was only partially completed. The tank was shipped to the United Kingdom at the end of the war for trials, but was later scrapped.

Development

The basic design was ordered by the Waffenamt as a parallel development to the Porsche Maus in June 1943. It was the heaviest of the Entwicklung (E) series of vehicles, meant to standardize as many components as possible. The proposed designs were the E-5, E-10, E-25, E-50, E-75 and finally the E-100.

In March 1944, Adlerwerke company from Frankfurt am Main submitted blueprint 021A38300 for a super-heavy tank called E-100, after the tank was proposed in April 1943 along with the other Entwicklung series vehicles. According to the blueprints, the tank would be armed with a both a 149 mm gun and a 75 mm gun. Two types of engines were proposed: one was a 700 hp Maybach HL230, with a transmission and turning mechanism borrowed from the Tiger II. The estimated top speed was 23 km/h. The second variant would have a new 1200 hp Maybach engine and a top speed estimated at 40 km/h. The design had removable side skirts and narrow transport tracks to make rail transport more viable. This design was very similar to the original 'Tiger-Maus' proposal, but had larger 900 mm diameter road wheels and a new spring based suspension rather than the original torsion bars. A new turret was designed; intended to be simpler and lighter than the Maus turret. Permission was given to produce the tank based on the potential use of the E-100 as a tank destroyer with either a 15 cm StuK L/63 or 17 cm StuK L/53 gun.

In July 1944 Hitler ordered the development of super heavy tanks to stop. Work on the E-100 continued at a very low priority with only three Adler employees available to assemble the prototype.

The first prototype was never fully completed and was found by the 751st Field Artillery Battalion of the American forces in April 1945. The partially completed vehicle was taken by the British Army for evaluation and then scrapped in the 1950s.

References

Panzerkampfwagen E-100 Wikipedia