Type Sculpture Created 1972 | Weight 1,000 kg Subject Liberty Bell | |
 | ||
Year First replica: June 1963
Second replica: c. 1972 Medium Sculpture: Best Genuine Bell Metal, 16% min-copper alloy
Base: brick, metal (steel), wood (mahogany) Dimensions 1.7 m × 1.6 m × 1.7 m (66 in × 64 in × 66 in) Condition "Treatment needed" (1993) Location Portland, Oregon, United States Similar Portland Children's Museum, Pioneer Courthouse, Screen Door, Delta Park, Portland International Raceway | ||
Liberty Bell refers to one of two replicas in Portland, Oregon, United States, of the original Liberty Bell in Philadelphia. The first replica was purchased in 1962, and installed in the rotunda of City Hall in 1964. On November 21, 1970, it was destroyed in a bomb blast that also damaged the building's east portico. The second replica was installed outside of City Hall soon after the blast (c. 1972) with funds from private donations. It was constructed at the McShane Bell Foundry in Baltimore and dedicated on November 6, 1975. The bell is listed as a state veterans memorial by the Oregon Department of Veterans' Affairs.
Contents
Chippendale settee upholstery repair liberty bell furniture repair upholstery portland maine
History
Portland has had two replicas of Philadelphia's original Liberty Bell. The first replica was purchased in 1962 for $8,000. It arrived in Portland in June 1963, with a damaged base and beam since the sculpture had slipped off its supports. Repairs were made before the replica was paraded through the city on a flatbed truck, then put into storage until Independence Day. The bell was publicly rung for the first time during holiday celebrations and installed in City Hall's rotunda on May 5, 1964.
On November 21, 1970, a dynamite bomb that had been placed beneath the bell detonated, damaging City Hall's east portico columns, shattering windows, and destroying the replica. No one was injured, but "shards of bell went everywhere through the main portico". The crime remains unsolved; no one claimed responsibility or was prosecuted for the blast. In 1993, The Oregonian said: "Wild, highly vocal speculation blamed the blast on either left-wing or right-wing terrorists, depending, of course, on the accusers' own political persuasions. Others guessed it was a monumental prank that careened out of control."
Portland's second replica is located outside of City Hall's east portico, near the intersection of Southwest Fourth and Madison streets and across from Terry Schrunk Plaza. Private donations totaling $8,000 allowed a new bell to be purchased for $6,000 and installed not long after the blast (c. 1972). The bell has also been attributed as a gift from Philadelphia residents to Portland school children. It was constructed at the McShane Bell Foundry in Baltimore and received a 25-year guarantee against breakage. The replica was dedicated on November 6, 1975. It was surveyed and considered "treatment needed" by the Smithsonian Institution's "Save Outdoor Sculpture!" program in October 1993. The Oregon Department of Veterans' Affairs lists the bell as one of the state's veterans memorials.
Description and reception
The 1 ton (910 kg) sculpture is made of Best Genuine Bell Metal, a sixteen percent min-copper alloy, and measures approximately 66 by 64 by 66 inches (1.7 m × 1.6 m × 1.7 m). It is attached to a horizontal beam that is supported by two V-shaped beams. The base is made of brick, metal (steel) and wood (mahogany covering) that measures approximately 13 by 76 by 54.5 inches (0.33 m × 1.93 m × 1.38 m). The west side displays the inscription Pass and Stow / Philada / MDCCLIII. Raised lettering along the top of the bell reads PROCLAIM LIBERTY THROUGHOUT ALL THE LAND UNTO ALL THE INHABITANTS THEREOF LEV. XX VVX. / BY ORDER OF THE ASSEMBLY OF THE PROVINCE OF PENNSYLVANIA FOR THE STATE HOUSE IN PHILADA. The founder's mark also appears. Smithsonian categorizes the sculpture as allegorical for symbolizing liberty.
The bell has been included in published walking tours of Portland.