Kalpana Kalpana (Editor)

HMAS Melville (A 246)

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Namesake
  
Melville Island

Laid down
  
9 May 1997

Homeport
  
HMAS Cairns

Length
  
71 m

Launched
  
23 June 1998

Displacement
  
1.969 million kg

Builders
  
NQEA Australia, Cairns

Ordered
  
2 April 1996

Commissioned
  
27 May 2000

Motto
  
"With Determination"

Construction started
  
9 May 1997

Weight
  
2,205 tons

Draft
  
4.3 m

HMAS Melville (A 246) wwwnavygovausitesdefaultfilesbadgesCrestM

HMAS Melville (HS 02/A 246) is the second ship of the Leeuwin class of hydrographic survey vessels operated by the Royal Australian Navy (RAN).

Contents

Design and construction

Melville has a displacement of 2,170 tons at full load. She is 71.2 metres (234 ft) long, with a beam of 15.2 metres (50 ft), and a draught of 4.3 metres (14 ft). Main propulsion machinery consists of four GEC Alsthom 6RK 215 diesel generators, which supply two Alsthom electric motors, each driving a propeller shaft. A Schottel bow thruster is fitted for additional manoeuvrability. Maximum speed is 18 knots (33 km/h; 21 mph), with a range of 18,000 nautical miles (33,000 km; 21,000 mi) at 9 knots (17 km/h; 10 mph).

The sensor suite consists of a STN Atlas 9600 APRA I-band navigational radar, a C-Tech CMAS 36/39 hull-mounted sonar, an Atlas Fansweep-20 multibeam echo sounder, an Atlas Hydrographic Deso single-beam echo sounder, and a Klein 2000 towed sonar. The sonars and echo sounders allow the vessels to chart waters up to 6,000 metres (20,000 ft) deep. There are three sets of davits fitted to carry Fantome-class survey boats. The ship is fitted with a helicopter deck for an AS 350B Squirrel helicopter (detached from 723 Squadron), although there are no long-term hosting facilities. She is armed with two single 12.7 mm machine guns. The ship's company consists of 10 officers and 46 sailors, plus up to 5 trainees. The Leeuwin class were the first RAN ships to use a multi-crewing concept, with three complements used to operate the two vessels.

Melville was ordered from NQEA Australia on 2 April 1996, and built at the company's shipyard in Cairns. She was laid down on 9 May 1997 and launched on 23 June 1998. Melville and sister ship Leeuwin underwent a joint commissioning ceremony on 27 May 2000. Melville initially carried the pennant number "HS 02", but this was changed to "A 246" in 2004. She is named after Melville Island, located to the north of Darwin.

Operational history

In late 2001, Melville began to operate in support of border protection operations in addition to her normal hydrographic duties. In January 2002, Melville was repainted from white to grey.

In June 2003, Melville was sent to south Queensland to inspect the believed wreck location of the Australian Hospital Ship Centaur, which had been torpedoed off Moreton Island during World War II. This had been prompted by several media reports that the wreck was unlikely to be Centaur, and had been wrongly classified since its discovery in 1995. Following up on surveys conducted by the minehunters Hawkesbury and Yarra a month previous, the efforts of Melville confirmed that the shipwreck was not the hospital ship.

References

HMAS Melville (A 246) Wikipedia