Kalpana Kalpana (Editor)

De Juffer, Gasselternijveen

Updated on
Edit
Like
Comment
Share on FacebookTweet on TwitterShare on LinkedInShare on Reddit
Mill name
  
De Juffer

Purpose
  
Corn mill

Storeys
  
Five storeys

Province
  
Drenthe

Operator(s)
  
Gemeente Aa en Hunze

Type
  
Tower mill

Year built
  
1971

Windshaft
  
Cast iron

De Juffer, Gasselternijveen

Mill location
  
Hunzelaan 1a, 9514 BM Gasselternijveen

Address
  
Gasselternijveen, Netherlands

Similar
  
De Eendracht - Gieterveen, De Zwaluw - Oudemolen, Mellemolen - Akkrum, De Gans - Ezumazijl, De Huinsermolen - Húns

De Juffer (English: The Damselfly) is a tower mill in Gasselternijveen, in Drenthe province of the Netherlands. It was built in 1971. The mill is listed as a Rijksmonument, number 46615

Contents

History

In 1841, a tower mill was built on this site by millwright R Vlieghuis of Borger. The mill was later fitted with Patent sails, the leading edges of which were streamlined using the Van Bussel system. The mill was demolished in 1963. The brake wheel was used in the restoration of De Bonte Hen, Zaandam.

In 1968, it was decided to rebuild the mill. The tower was built by G J Warmink of Gasselternijveen, incorporating material from the mill demolished in 1963. Millwrighting work was by Medendorp of Zuidlaren. The brake wheel and wallower came from a demolished drainage mill De Breeken, which had stood in Westerwijtwerd, Groningen. New sails were fitted in 2009.

Description

De Juffer is what the Dutch describe as a "ronde stenen stellingmolen". It is a five storey brick tower mill with a staqe. The stage is at third floor level, it is 6.20 metres (20 ft 4 in) above ground level. The four Common sails, which have a span of 19.20 metres (63 ft 0 in), are carried in a cast iron windshaft. This was made by Fabrikaat De Muinck Keizer, of Martenshoek, Groningen in 1899. The windshaft also carries the brake wheel which has 57 cogs. The brake wheel drives the wallower (32 cogs) at the top of the upright shaft. At the bottom of the upright shaft, the great spur wheel (72 cogs) drives the lantern pinion stone nut, which has 19 staves. This drives the 1.10 metres (3 ft 7 in) diameter French Burr millstones.

Public access

De Juffer is open to the public on Wednesdays from 13:00 to 15:00, on Saturdays from 10:00 to 12:00 and at other times by appointment.

References

De Juffer, Gasselternijveen Wikipedia


Similar Topics